OBX Solara/Camry 1MZ-FE Headers/Y-Pipe (Review)

[facevedo17]

wow Just saw this today ,, Nice King I see by the pics how the y pipe hangs low that sucks my Days y pipe hangs low aswell ....but over all king are you happy with its result and do you encourage the Solara tuning community to get ....??


Happy new years fellows !!!!

[Akfahad]

they look pretty good too....glad they worked out!

[Eye8Pussies]

wow Just saw this today ,, Nice King I see by the pics how the y pipe hangs low that sucks my Days y pipe hangs low aswell ....but over all king are you happy with its result and do you encourage the Solara tuning community to get ....??


Happy new years fellows !!!!

Cisco! Yes, yes I do! (as long as you either have the patience to install them yourself, or know a mechanic who can do it for a good price) lol

[facevedo17]

I'll keep that in mind I guess it comes down to a spot , and the right tools

[TxBmbleBee]

so from what i am gathering king, these do fit and they are most deff worth it for the lower price over the jpp?

im still wondering tho what the dyno results will yield. these would be perfect to throw on right now since i have excellent access to the rear headers with my engine dangling

[Eye8Pussies]

long story short, I say that they're well worth the money since they're pretty much dirt cheap. and since you have everything out, the install will be pretty easy and simple.

as for dyno results- it's definitely an improvement. but pretty much any header would be better than the stock manifolds (not that they're that bad, but...it doesn't take much to improve upon them, especially if you're boosted)

[5842solara]

so the ebay obx headers is probably the cheapest place? for me in hawaii its going to be about 450 shipped...

[Eye8Pussies]

I'm pretty sure, yeah.

But if you're in hawaii, check around for local shops that are obx dealers and you may at least save a bit on saving

[TxBmbleBee]

one last question tho, will this bolt up to my existing stock set up if i dont have a cat back?

obx is very lucky to have you, if i had searched and not found this review, there is no way in hell i would have given them a chance lol

[Midias]

one last question tho, will this bolt up to my existing stock set up if i dont have a cat back?

obx is very lucky to have you, if i had searched and not found this review, there is no way in hell i would have given them a chance lol

It should bolt up no problem.

[SleeperSolara]

one last question tho, will this bolt up to my existing stock set up if i dont have a cat back?

obx is very lucky to have you, if i had searched and not found this review, there is no way in hell i would have given them a chance lol

My friend bought the OBX setup.
It looks just like the JP header and y-pipe set up.
There's a big improvement.
The only difference that i can see that the runner on the front manifold is that JP has theirs ceramic coated, as for OBX it's just SS.

[Dawgz]

I dono why JP didnt go with Stainless steel pipes, for the price they were asking for these setups.


and, i dono about this bolting up to a stock catback....the jpp yipe is 3"

[Eye8Pussies]

yah... somebody had to take the dive right? And with the boost that I'm pushing, the stock headers were definitely a restriction


as for bolting up...it should still bolt up with the right gasket, though the obx setup is a 2.5" y-pipe, but you just remember that you won't have a cat then (if you need one).

[5842solara]

I'm pretty sure, yeah.



i would try but shops here are pricy.. if u dont know them...
bt thanks foe the inprt
But if you're in hawaii, check around for local shops that are obx dealers and you may at least save a bit on saving