Another TRD custom catback 56K?
Well it is time for me to put the 6th catback on my car sense I have had it. I just finished collecting all the pieces and this should be the last exhaust I ever make. It is all stainless with 2 resonators both perforated with a stainless highflow cat and stainless flanges and hangers. I am going 2.5 inch mandrel bent piping and using my TRD muffler. Hopefully I will be assembling it in about 3 weeks when my schedule clears up and I can get some time with my friends tig. I just thought I would make a nice build thread with pictures and how to make your own exhaust. BTW the cost for all the pipe and resonators was between 250-300 for stainless and about 150 for aluminized. I will also post video of TRD with 2.5 pipe, Y pipe, highflow cat and louvered resonator 18 inch and TRD with straight pipe, Y pipe, highflow cat and 2.5 inch piping and TRD with 2.5 pipe, Y pipe, highflow cat and louvered resonator 14 inch and OBX with highflow cat and Y pipe, when I am done. So ask any questions if you have any.
What I have below is
2 45 degree bends to make the 1 S bend
2 Resonators perforated 18 inch body 22 inch overall
1 Stainless highflow cat OBD2 compliant 11 inch tip to tip
10 feet of straight (overkill with 2 resonators)
1 90 degree bend for right before the trd muffler
4 flanges 2 for the catback and 2 for the highflow cat.
2 hanger rods 3/8
1 O2 sensor bung (not pictured)
Highflow cat
Cat again
Cat and 2 18 inch perforated silverline stainless resonators.
Inside of cat
Inside of resonator
Bends, flanges ect.
1/2 inch stainless flange
Everything

What I have below is
2 45 degree bends to make the 1 S bend
2 Resonators perforated 18 inch body 22 inch overall
1 Stainless highflow cat OBD2 compliant 11 inch tip to tip
10 feet of straight (overkill with 2 resonators)
1 90 degree bend for right before the trd muffler
4 flanges 2 for the catback and 2 for the highflow cat.
2 hanger rods 3/8
1 O2 sensor bung (not pictured)
Highflow cat

Cat again

Cat and 2 18 inch perforated silverline stainless resonators.

Inside of cat

Inside of resonator

Bends, flanges ect.

1/2 inch stainless flange



Everything

Last edited by Midias on Sun Feb 28, 2010 1:13 am, edited 1 time in total.
-
Midias - SolaraGuy Semi-Pro Racer
- Posts: 3550
- Joined: Sun Jul 18, 2004 8:06 pm
- Location: Rochester NY