Limited V6 Exhaust Ypipe 1MZ *Update-Back 1 last time*

by **cartang** » Wed Jul 16, 2008 12:17 pm

Hi this Y pipe can be installed with greddy catback system Thanks for the input

by **Midias** » Wed Jul 16, 2008 12:22 pm

cartang wrote:Hi this Y pipe can be installed with greddy catback system Thanks for the input

yes

by **Dawgz** » Wed Jul 16, 2008 12:27 pm

cartang wrote:Hi this Y pipe can be installed with greddy catback system Thanks for the input

Mine is hooked up to the greddy Evo II full cat back

here are some pics for u guys...

Stock ypipe compared to the Dat's ypipe with a High Flow Magna flow made by Midias.

Ypipe fitted to the cat fitted to the Greddy Evo II mid pipe

by **Dawgz** » Wed Jul 16, 2008 12:37 pm

oh and dats, before u or anyone else get a headache...please make sure the flexpipe is in the correct place this time.

by **atclate** » Wed Jul 16, 2008 4:28 pm

Did you guys see that? this thread is going to hit 50 pages. So awesome for an aftermarket upgrade thread. I'm stepping half a foot into this GB. I mean I'm interested, but not ready to buy yet. When's the deadline for letting you know? And yeah, don't want to have the same trouble other dudes were having. And is it possible to get 3" piping? Just wondering =P

by **lilm** » Wed Jul 16, 2008 4:47 pm

Dawgz wrote:oh and dats, before u or anyone else get a headache...please make sure the flexpipe is in the correct place this time.

ya this is what im talkin about

by **lilm** » Wed Jul 16, 2008 4:55 pm

atclate wrote:Did you guys see that? this thread is going to hit 50 pages. So awesome for an aftermarket upgrade thread. I'm stepping half a foot into this GB. I mean I'm interested, but not ready to buy yet. When's the deadline for letting you know? And yeah, don't want to have the same trouble other dudes were having. And is it possible to get 3" piping? Just wondering =P

why would you want 2.5 headers to a 3 inch y pipe back to 2.5 inch pipes....?

if you wanna do that just get a shop to custom 3 inch

by **shazbot** » Wed Jul 16, 2008 8:17 pm

Hey DatSRBoi, sign me up for one will ya. I have 94 Camry XLE 1mzfe. Thanks

by **DatSRBoi** » Wed Jul 16, 2008 10:30 pm

I was suppose to answer by tomorrow night... but I will hold off till Sunday / Monday night because I HAVE to tell him by then for sure to throw the setup away or make another batch. I have to know soon because there are new cars out there that he has to get start on and the solara set up is taking space.

THIS DESIGN IS THE FIXED GOOD DESIGN AND A 100% FITMENTS ONE AND NOT THE BAD ONE. 250 shipped to your door. Takes about a month to make it by hand and shipped to us. Half of the price is shipping a lone almost to us then from us to you (cheaper this way).

But the down fall is I must have a guarantee 20 buyers who will pay. If anyone backs out I AM the one paying for it in the end out of my own pocket and I do not even drive a solara anymore.

And base on what I see so far... 2 buyers. I can't do maybe buyers sorry.

by **Chinky420** » Wed Jul 16, 2008 10:36 pm

if the batch falls through, what would the cost be for a single?

by **DatSRBoi** » Wed Jul 16, 2008 11:11 pm

Chinky420 wrote:if the batch falls through, what would the cost be for a single?

450-600 plus. (Hand made, Hand tig weld, stainless steal. Then shipped to us and from us to you. Its shipped to us by train, crates, and plane in bulk with hundred of other pipes)

by **DatSRBoi** » Wed Jul 16, 2008 11:14 pm

I can not remember off my head since it has been so long and I do not feel like reading from page one to find out what it was but I paid 500+ give or take for my original one to be made. Unlike this it was pure steel metal, NON-tig weld, and a single piece.

What you are getting is a stainless steel, tig weld, and two piece so that you can fit your own cat to it. Originally the test pipe we made was suppose to be replaceable with the older model camry stock cat. I can not what we designed it off as but the older model stand alone stock cat can fit on it.

All pipes are hand made and hand inspected after all tig welds are done. To this day all welds hold and not one has cracked (unless abused other wise of course)

by **gecko011** » Thu Jul 17, 2008 1:20 am

Gday,

Count me in for this. I will definitely want to be in for the Group buy, I have the Cash_ola, but I am wondering if you are able to ship out to Australia if this buy goes ahead.
(& wat extra cost i would be looking @ for freight.. I am keen..)

by **lilm** » Thu Jul 17, 2008 3:59 am

count me in for one but sadly i do not think we will get 20 people

by **cartang** » Thu Jul 17, 2008 5:34 am

I am in GB

Limited V6 Exhaust Ypipe 1MZ Update-Back 1 last time

Y pipe

Who is online