Limited V6 Exhaust Ypipe 1MZ *Update-Back 1 last time*

[lilm]

Not trying to hinder your sale but do they still have to be modified to fit?

[DatSRBoi]

Not trying to hinder your sale but do they still have to be modified to fit?

This is the design to the good design run and not the bad one

[Midias]

Man makes me want to buy another so I can have a spare.

[Akfahad]

anybody who is contemplating on this ---> do it! I had this on my car before I got the JP system and it's definitely worth it, Dat makes no money off of this, he's just trying to help the community. All you noobie's who just joined, get this! You won't regret it.

[Dawgz]

Ive got this on my exhaust.

Compared to the stock exhaust, it surely helped me. took me from 166whp on cali spec to 200whp

[Chinky420]

dats, i'm in

and if it falls through, can you try to get the designs, so that we can add it to our compendium of knowledge, aka solaraguy.com

or if nothing else, can you get the designs for me, so i can fabricate one if this doesnt work out.

and to answer lilm directly, no you do not have to be modified to do it. they are supposed to bolt right up to the stock headers and the stock exhaust. if you have an aftermarket exhaust, then it should still fit up (as midas, he is constantly trading out exhausts, and he rolls with dat's y-pipe).

yay, dat's y-pipe is back (hopefully)

[atclate]

Ive got this on my exhaust.

Compared to the stock exhaust, it surely helped me. took me from 166whp on cali spec to 200whp

Dawgz, do you have the Cali Spec or the Fed spec? I thought the Dat's y-pipe doesn't fit the Cali spec headers, that's why I didn't buy it off another member here.
If it only fits Fed spec, I would consider this if someone else on this forum has a fed spec for sale.

[Dawgz]

Ive got this on my exhaust.

Compared to the stock exhaust, it surely helped me. took me from 166whp on cali spec to 200whp

Dawgz, do you have the Cali Spec or the Fed spec? I thought the Dat's y-pipe doesn't fit the Cali spec headers, that's why I didn't buy it off another member here.
If it only fits Fed spec, I would consider this if someone else on this forum has a fed spec for sale.

my car is cali spec, but i have switched it over to Federal spec. (all u have to do is get the headers from the federal spec and switch them over. ur ecu will still read the a/f sensors correctly, but u might need a o2 simulator from urdusa.com (tybe B sensor) to fool the sensor after the cat.

this switch alone will net u ALOT of whp.

[Dawgz]

U can see from the before and after...the dark red line was the whp with the cali spec stuff on...right around 4800 the power would drop due to the exhaust being restrictive. After the cali spec to federal spec change + Dat's ypipe u can see how the power kept going. till 5300rpm....

After that, it was a fuel issue...i switched out the stock pump for a walbro 190lph and netted another 20whp. but i still have fuel issues uptop where im maxing out the stock injectors...but dont worry, i got my supra injectors going in soon =)

[Mr_Krispy1183]

Damn, I'd be totally down for the pipe, but I need to come up on Fed-spec headers. Any SoCal people willing to help out on a locate/install?

[Dawgz]

Check ur local junk yard/scrap yard.

any federal spec header from the 1mz will do...this means the gen 4 camry / gen 1-1.5 solara.

Ur scrap yard is most likely to have the camry stuff around.

[Mr_Krispy1183]

^Thanks, but being here in the SFV, Sun Valley has the most scrap yards in the immediate area, and most of the cars I found were, expectedly, CA cars. Being that you were CA-spec at one time as well, where did you come up on said parts?

[Dawgz]

^Thanks, but being here in the SFV, Sun Valley has the most scrap yards in the immediate area, and most of the cars I found were, expectedly, CA cars. Being that you were CA-spec at one time as well, where did you come up on said parts?

its pretty weird, i got a cali spec car, here in NJ...and the original owner of it lived in NY....so i dono why the hell it was a cali spec. And then some people in CALI got federal spec ones...useless!

anyway, i aquired my headers on here...i think i baught them off of JavaJoe when he switched to the JPP system. So mine are off his gen 4 camry. Im pretty sure he sold it to me....if my memory serves me correct.

[Midias]

You can usually find manifolds on ebay fairly cheap about 60-80 a set.

[Akfahad]

even if you can't find the fed spec headers in time, I still recommend getting this y-pipe before it totally goes out of production...that way you can take your time searching.