Throttle Body Spacers & Overboring???

[woa_its_j3ff]

I'll just ask for those who are wondering:

Where can you purchase the TB spacer?

[CamryOnBronze]

there is a link to a place that has it in one of the old threads about it, since I believe its actually for the tundra- but I dont feel like searching for it

[SleeperSolara]

Actually i think it's for a Tacoma.

[Midias]

I'll just ask for those who are wondering:

Where can you purchase the TB spacer?

I will copy and paste my standard PM reply

I get his question a few times a month ie a lot so this is a cut and paste if you have questions feel free to ask and Yes I like it and I think it is worth the cash. You will probably be most interested in redknights thread.

First off you need one from a toyota tachoma more to come from that. You should get it from www.hubcapsplus.com for best price about 80 bucks shipped read below.

OK here are some old threads
*************************************************************

Posted: Tue Jun 06, 2006 12:00 pm Post subject:

--------------------------------------------------------------------------------

OK I got it in. The Home Depot did not have 65mm m8X 1.25 bolts just 70 and 60, so in a lapse of good judgment I got 60mm The fit on the top 2 holes no washer. I will be getting 70 mm eventually. 60 mm does NOT fit the bottom 2 holes. I used the 90 mm that came with it and 2 washers each from the kit; I will probably try 70 mm later on. Other than that install was easy.

How did it feel well it is hot out today so I cannot wait for evening to really have fun but I do feel like midrange has had a nice improvement and I would recommend it as a cheap mod for other people. Second gear feels a lot nicer and the powerband feels smoother. I will try to get pictures soon.

****** Update
On the top use m8 X 1.25 70mm long and on the bottom use 2 of the 90 mm long that came with the kit and 2 washers under each 90 and 1 under each 70mm. You will need to also buy 2 m8 washers for the top sense the kit only comes with 4.

*************************************************************



Origional Thread
http://www.solaraguy.org/viewtopic.php? ... e41509aafb


Pictures
http://www.solaraguy.org/viewtopic.php? ... tle+spacer

Redknights report of 20% ariflow increase
http://www.solaraguy.org/viewtopic.php? ... tle+spacer

*************************************************************

http://wheelskin.com/spe-34055.html
Here I found this as the cheapest place, even cheaper than the same company's ebay stuff 79.99 free shipping and enter the coupon code HELIX and get 4 dollars off

Just ordered mine they take paypal yey

I also found a couple a little cheaper on ebay but I wanted the one Greg mentioned.
*************************************************************

[Midias]

nope this one

http://wheelskin.com/spe-34055.html

1996 - 2004 Toyota 4Runner - T100 - Tacoma 3.4L V-6 Throttle Body Spacer

What happened there was a post in between my 2 posts I swear???

[woa_its_j3ff]

Ok to bump this:
I searched around and around for an install thread.

How to do this?
Got THESE In the mail, John (Sleeper) said to set it up like this??


But then how come I still have extra parts?
any one can take a pic of me of the finished product please?

[Midias]

The extra parts are for a tachoma all you need is the spacer bolts and gaskets here are a couple pics.

[woa_its_j3ff]

thank you Midias, will install this firts thing tommorrow.

[woa_its_j3ff]

Right now I have the top two bolts off but the bottom to its like stuck in there, I've tried using some pliers but to no avail, Midias, how do I remedy this situation???

[Midias]

I used some channel locks but vice grips would work well too.

http://www.solaraguy.com/viewtopic.php? ... ht=channel

[ThatVietGuy]

Easier way than that: thread two nuts to the stud (one on top of the other) and turn the bottom nut. That'll make the bottom one turn into the top nut, but since the top nut won't go anywhere, that'll give you the force to turn the stud.

That's what my friend showed me when I did mine.

[woa_its_j3ff]

ok ill try that you guys. thanks
its stucko n there impossibly tight,

tighter than a virgin's pussy goddamn..

[Midias]

ok ill try that you guys. thanks
its stucko n there impossibly tight,

tighter than a virgin's pussy goddamn..

Just put a little muscle into it and if that does not work spray with PB blaster.

[woa_its_j3ff]

ok update. NO luck. WTF. pissing me off.

[Midias]

ok update. NO luck. WTF. pissing me off.

What are you using to remove them?