Limited V6 Exhaust Ypipe 1MZ *Update-Back 1 last time*

by **Midias** » Thu Dec 21, 2006 9:59 am

Where my test pipe was cut off the main pipe the flanges were welded on crooked not a big deal but it may affect some people it just means I will have to match the angle on my high flow cat.

by **Mcthings** » Thu Dec 21, 2006 10:32 am

I have a camry too... if mine comes today I'll tell you if it fits

by **NRDriver** » Thu Dec 21, 2006 7:15 pm

tomorrow i am taking my car to work and i am gonna use the lift to install my pipes so it should take 15 or 20 minutes. i will take pics of it up in the air so you all can see. that will be with the greddy evo exhaust.

by **DatSRBoi** » Thu Dec 21, 2006 7:16 pm

NRDriver wrote:tomorrow i am taking my car to work and i am gonna use the lift to install my pipes so it should on taake 15 or 20 minutes. i will take pics of it up in the air so you all can see

No need to. I found the problem. Its not the flangs. Its how the Flex was moved to put in the mid pipe. Its pushing against the frame 3/4th of an inch making the rear flang not seal tight... We should of put on a smaller flex. But Ill jump on it as soon as I can get a hold of him.

Im waiting for my friend to come on and we will get it fixed.

Sorry guys.

by **Midias** » Thu Dec 21, 2006 8:25 pm

Well I alerted dat to the real problem the flex section. So now my custom exhaust is all mesed up but I thought I would at least share my highflow cat with custom flanges. PLEASE REMEMBER it has been through 2 winters. And yes gthe flange on the left is on crooked on purpose because it had to match the on the Y pipe

[img][img]http://i86.photobucket.com/albums/k93/midias12/DSC00798.jpg[/img][/img]

by **CASTRO** » Thu Dec 21, 2006 9:52 pm

yeha i noticed that my test pipe flanges were crooked too

by **Mcthings** » Fri Dec 22, 2006 9:47 am

Well I called USPS today and the lady said that there is a delay on priority shipping, especially due to the weather and this time of year. So for anyone that hasn't gotten theirs yet, that could be the problem.

I've been saying this for days but hopefully mine will come today

by **DatSRBoi** » Fri Dec 22, 2006 11:18 am

He hasn't called me back yet. He's been pretty busy but ill get an answer soon though.. Im not running anywhere and hope you guys arnt mad at me. This project means more then you guys saving to me. Its my contribution to something I love working on every day. Ill help out somehow.

by **Mcthings** » Fri Dec 22, 2006 12:31 pm

Well it's schedualed to come today, I found out. so no worries about a lost package or anything on my end.

by **Mcthings** » Fri Dec 22, 2006 2:01 pm

It came!

I took some quick pictures of it. Looks awesome. Hopefully I will be able to get it installed soon!

by **Midias** » Fri Dec 22, 2006 2:29 pm

Mcthings wrote:It came!

I took some quick pictures of it. Looks awesome. Hopefully I will be able to get it installed soon!

I hope you have better luck than I did

by **CASTRO** » Fri Dec 22, 2006 2:55 pm

same here

by **facevedo17** » Fri Dec 22, 2006 3:23 pm

damn this suckssss!!!!! well its to cold by me to anyhting anyway but keep the installation results coming

by **Mcthings** » Fri Dec 22, 2006 4:53 pm

Well, I just went down to a local exaust place, and he said he would figure it out and make it work for 80 bucks. So I said sure, why not. An hour later it was on my car and good to go!

by **Mcthings** » Fri Dec 22, 2006 6:03 pm

Just wanted to let you know that I just made a DIY for the 02 sim that we have to have on for this pipe. You can see it at either SG or Toyota Nation

SG: http://www.solaraguy.org/viewtopic.php?t=30312

TN: http://www.toyotanation.com/forum/showt ... ost1561363

Limited V6 Exhaust Ypipe 1MZ Update-Back 1 last time

pipe fits

Re: pipe fits

Who is online