Limited V6 Exhaust Ypipe 1MZ *Update-Back 1 last time*

by **Midias** » Fri Sep 22, 2006 4:29 pm

Fore 250-300 hell yes I am

1. CASTRO
2. Akfahad
3. SleeperSolara
4. Facevedo17 AKA(FDATOYO)
5. Ruffrydasean (Sean)
6. NRDriver
7. gregtrd (Greg)
8. Sparticus (Jason)
9. Midias (Corey)

by **Akfahad** » Fri Sep 22, 2006 4:43 pm

Dat, once you get the pipes in your posession...how do you want to do payment?

Josh

by **ruffrydasean** » Fri Sep 22, 2006 4:59 pm

I see i need to start doing odd jobs, I'm gonna hustle hustle hustle.

by **DatSRBoi** » Fri Sep 22, 2006 5:05 pm

Akfahad wrote:Dat, once you get the pipes in your posession...how do you want to do payment?

Josh

For now I will only accept paypal. Its faster and quicker then sending checks. Im not a big fan of money orders.

by **Midias** » Fri Sep 22, 2006 5:32 pm

Is the flex section reqired because here in NY cats are required amnd they often look so i was thinking about cutting it out and welding a new one in. Also what is that coating on it (powder?) or is it Stainless.

by **DatSRBoi** » Fri Sep 22, 2006 5:46 pm

Midias wrote:Is the flex section reqired because here in NY cats are required amnd they often look so i was thinking about cutting it out and welding a new one in. Also what is that coating on it (powder?) or is it Stainless.

Its true stainless steal. No cheapy coat that falls off after 3 days.

by **Midias** » Fri Sep 22, 2006 5:51 pm

DatSRBoi wrote:
Midias wrote:Is the flex section reqired because here in NY cats are required amnd they often look so i was thinking about cutting it out and welding a new one in. Also what is that coating on it (powder?) or is it Stainless.

Its true stainless steal. No cheapy coat that falls off after 3 days.

Ok cool I don't want to weld stainless stupid rust.

How much to get an extra flange I could weld onto a 2.5 inch high flow cat I allready have. I can just bolt it on and gut my custom self made cat back shorter.

One last question how does it affect the top end do it help that damn stupid lack of power after about 5.8K rpm

by **DatSRBoi** » Fri Sep 22, 2006 7:07 pm

http://zwmotorsports.com/solara.html

proof of project existance.

by **calreef18** » Fri Sep 22, 2006 7:48 pm

1. CASTRO
2. Akfahad
3. SleeperSolara
4. Facevedo17 AKA(FDATOYO)
5. Ruffrydasean (Sean)
6. NRDriver
7. gregtrd (Greg)
8. Sparticus (Jason)
9. Midias (Corey)
10.calreef18 (calvin)

bring it on

btw whats a good 02 simulator? I've seen them online for various price ranges. Is $25 too good to be true?

by **CASTRO** » Fri Sep 22, 2006 9:22 pm

Dats, what 02 simulator are you running? i just wanna use one thats been proven to work

by **DatSRBoi** » Fri Sep 22, 2006 9:30 pm

http://cgi.ebay.com/ebaymotors/O2-Oxyge ... enameZWDVW

I got something like this exactly only my casing was black. I paid 90 bucks for mine because I got it at Big RX7 car shop where thigns were over priced. I was in a rush to get it down that day... Regrets.

You can get them as low as 10 bucks. Just get one thats durable and water proof. Their all the same just in different protective casings.

by **DatSRBoi** » Fri Sep 22, 2006 9:37 pm

Update alitle.

I PM astro (everyone should thank him for helping) and he is shipping me the stock Y pipe. As soon It comes In Im driivng 1 hour to Denton where I will drop of the pipe to be copied and it will be shipped full ride to the shop. From there IT will come back about a month longest 2 months and ready to ship out to my happy solaraguy customer..... Oh yeah Ive only posted this special on solaraguy.org. no other site knows this.

If this goes well Ill jump into the Gen 2s.. It will take alittle longer because I dont personally own a Gen 2 nor have a fabricated Straight pipe to get copied.

Adding..... I wont collect a dime until all Pipe is in my hand in Texas. I will make 12 to 15 only. Any left over remember I will raise the price on those for my looses incur from then . And If I can get them numbered which as of right now it is being numbered.. I will be keeping the Edition Number 1.. That will be a special for those who want the first one off the line for a cool 5 dollar more haha (Consider it a tip hehe)

...

WEEE I like to spice it up alittle. Because since when did you get a performance part that works for super cheap. Even ebay looses in this game.

I will also keep this projects blue print. If after 15 we get another 10 Ill start another line for it but it wont be the special numbered and you will pay alittle more for them because the cost to get them to me isnt cheap. Your shipping a huge box of metal haha. Under 10 and your paying the good price of a single custom made.... Ole lets say over 350 no shipping yet? SO GET THEM NOW. My friend has offered to help us this much.

by **Gregtrd** » Sat Sep 23, 2006 2:58 am

im pretty sure that theres two different y pipes for the 1mz. on my camry my exhaust manifolds have the cat.s on them which means that my y pipe is a bit shorter then the 1mz with exhaust manifolds that are cat.less, that y pipe is bit longer. when i say longer i mean interchanging them from manifolds with cats to catless manifolds. hope this doesn't confuse you.so would i have to get the the shorter ex. manif. for it to work with my camry. by the way my camry has a 1998 v6 engine it.

by **Sp33d** » Sat Sep 23, 2006 3:57 am

im in

-mark

by **Midias** » Sat Sep 23, 2006 7:15 am

Sp33d wrote:im in

-mark

1. CASTRO
2. Akfahad
3. SleeperSolara
4. Facevedo17 AKA(FDATOYO)
5. Ruffrydasean (Sean)
6. NRDriver
7. gregtrd (Greg)
8. Sparticus (Jason)
9. Midias (Corey)
10. calreef18 (calvin)
11. Sp33d (Mark)

Limited V6 Exhaust Ypipe 1MZ Update-Back 1 last time

Who is online