Throttle Body Spacer, Crank pulley ect (PICS)

by **Midias** » Sat Jun 10, 2006 11:43 am

Well I finally got some new picts of my engine. Here are my UDR Light Weight Crank Pulley, Helix Power Plus Throttlebody Spacer, Plasma Booster Ignition Amplifier and Hyper Voltage Regulator System (with custom bracket).

by **NeFaRiOuS_SLE** » Tue Jun 13, 2006 4:03 am

Nice!

by **SleeperSolara** » Tue Jun 13, 2006 6:09 am

Nice man.

by **DatSRBoi** » Tue Jun 13, 2006 7:44 am

Feel Any difference in power?

And what is that? No the Sun Grounding thing. Im talking about the blue wires connecting to the big red ones.

by **Midias** » Tue Jun 13, 2006 7:55 am

The blue wires go the the smaller black box on the fuse box. That is a plasma booster from ignition solutions. The red connectors are quick connects for fast inatall. Yes I feel like the spacer gave me a gain in midrange power.

by **sydemoid** » Wed Feb 06, 2008 7:36 pm

Got my Throttlebody Spacer, Followed Midias' write up....

I have an Injen, and CAE, with an AEM dry filter... No SC

The pickup after 3000 RPM is noticeably quicker... the car has the same dead spot on the high end.... perhaps a port and polish will help open it up more...

Thank you guys for all the info!

by **SdeA** » Wed Feb 06, 2008 9:39 pm

Will the throttlebody spacer work on a throttlebody that has been overored?

by **Midias** » Wed Feb 06, 2008 9:46 pm

SdeA wrote:Will the throttlebody spacer work on a throttlebody that has been overored?

Yes and wow this is an old thread I still have a CAI vs my CPE

by **Midias** » Wed Feb 06, 2008 9:50 pm

sydemoid wrote:Got my Throttlebody Spacer, Followed Midias' write up....

I have an Injen, and CAE, with an AEM dry filter... No SC

The pickup after 3000 RPM is noticeably quicker... the car has the same dead spot on the high end.... perhaps a port and polish will help open it up more...

Thank you guys for all the info!

To open up your top end try a custom Y pipe full exhaust and high flow cat.

by **Camry Racing** » Thu Feb 14, 2008 9:59 am

okay I'm really lost here what is the function of that throthel body spacer?

by **jdt.solara** » Thu Feb 14, 2008 2:24 pm

So I might be missing something, but I can't find a throttle body spacer designed for a solara. What model fits the solara? :-?

by **Jakecallun20** » Thu Feb 14, 2008 3:08 pm

i dont remember which one, but check the Gen1/1.5 parts listing

by **Midias** » Thu Feb 14, 2008 3:10 pm

jdt.solara wrote:So I might be missing something, but I can't find a throttle body spacer designed for a solara. What model fits the solara?

Throttle Body Spacer (www.hubcapsplus.com)
Helix Power made for Tacoma 3.4L V-6 fits 3.0 V6 (SPE-34055)
Use coupon code HELIX

Requires 2 new bolts from home depot M8 X 1.25 70mm and 2 M8 Washers for top for bottom use the 90 mm screws that came with the kit and 2 washers under each.

by **99V6solaraSE** » Thu Feb 14, 2008 5:54 pm

just got the crank pulley and oooh wheee... definitely feels nice..

by **woa_its_j3ff** » Thu Feb 14, 2008 6:12 pm

very impressive, how's the response since have them installed? how long did it take?

and btw, is that RUST by your throttle body cable?!

Throttle Body Spacer, Crank pulley ect (PICS)

Throttle Body Spacer, Crank pulley ect (PICS)

Who is online