2002 2.4l 4cyl LOW IDLE .... Please help me!
I know, I know, the general rule of thumb is to clean the Mass Air Flow Sensor, and clean out the trottle intake... Done, did that! Even replaced the air filter!
I've hooked up my car to a ODB-II reader, the car idles at 650-ish RPM, somtimes it will go as low as 600RPM, when I kick in the A/C it jumps to 780RPM, but then settles back down to 650-ish RPM. When the car is in drive it stays pretty solid at 600RPM.
I want my car to idle at 800-ish to 1000-ish RPM, that seems to be the smoothest idle speed.
How can I program my ECU to tell my blinking car to blinking stay at that blinking RPM range?
Or, what else could be the problem, and how can I fix it? The last thing I want to do is go to a Toyota dealer, I'm affraid of getting charged out the A$$, and I don't trust service station technicians with my car...
I've hooked up my car to a ODB-II reader, the car idles at 650-ish RPM, somtimes it will go as low as 600RPM, when I kick in the A/C it jumps to 780RPM, but then settles back down to 650-ish RPM. When the car is in drive it stays pretty solid at 600RPM.
I want my car to idle at 800-ish to 1000-ish RPM, that seems to be the smoothest idle speed.
How can I program my ECU to tell my blinking car to blinking stay at that blinking RPM range?
Or, what else could be the problem, and how can I fix it? The last thing I want to do is go to a Toyota dealer, I'm affraid of getting charged out the A$$, and I don't trust service station technicians with my car...
He's not any kind of program, Sark. He's a user!
-
VidGameKing - Just Licensed SolaraGuy
- Posts: 41
- Joined: Sun Aug 12, 2007 4:35 pm
- Location: Newark, CA