[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - How much bump stop?

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

How much bump stop?

How much bump stop?

Postby nemoxfishy » Fri Mar 27, 2009 2:16 pm

Quick question, quick answer please, as im sitting at the computer holding an exacto knife with my car jacked up outside WAITING FOR AN ANSWER :lol:

How much do you cut the bump stop on the rears?
I have Tein springs but I don't have the instructions!! Tein's site doesn't have it for the Solara either. HELP!

I searched but can only find results for the fronts, which is about 1" or half of its length. HOW ABOUT THE REARS?
Thanks!!
Image
User avatar
nemoxfishy
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 309
Joined: Fri Dec 01, 2006 6:51 am
Location: BC, Canada
Top

Postby CASTRO » Fri Mar 27, 2009 2:22 pm

i believe it was about less than half so 1/3 should be safe.
97 Camry XLE S/C V6 -- 07 "New Formula Red" S2000 -- 07 "Milano Red" Fit Sport
ImageImage
User avatar
CASTRO
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2032
Joined: Fri Feb 27, 2004 12:35 am
Location: Elk Grove/Sacramento Cali 916 Area
Top

Postby nemoxfishy » Fri Mar 27, 2009 2:26 pm

THX~!
Image
User avatar
nemoxfishy
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 309
Joined: Fri Dec 01, 2006 6:51 am
Location: BC, Canada
Top

Postby nemoxfishy » Fri Mar 27, 2009 2:27 pm

Anyone can verify? Or else i'm gonna head out and start cuttin!!
Image
User avatar
nemoxfishy
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 309
Joined: Fri Dec 01, 2006 6:51 am
Location: BC, Canada
Top

Postby akora12 » Fri Mar 27, 2009 2:38 pm

This may be too late, but here's a photo that's on the forum somewhere.

Image

That's where I cut mine.
Image
2000 Solara SEV6 5-speed S/C - Dismantled and sold :(
akora12
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1410
Joined: Tue Jan 16, 2007 5:12 pm
Location: FW IN
Top

Postby nemoxfishy » Fri Mar 27, 2009 2:40 pm

^^LOL I come back in to check every now and then =]
I believe that picture is only for the front bump stops?
Image
User avatar
nemoxfishy
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 309
Joined: Fri Dec 01, 2006 6:51 am
Location: BC, Canada
Top

Postby akora12 » Fri Mar 27, 2009 2:45 pm

Dunno, I cut all of them the same with no problems. Same for all of my hondas as well.
Image
2000 Solara SEV6 5-speed S/C - Dismantled and sold :(
akora12
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1410
Joined: Tue Jan 16, 2007 5:12 pm
Location: FW IN
Top

Postby ArizonaEagle07 » Fri Mar 27, 2009 3:09 pm

May I ask what is the purpose of cutting the bump stop?
RIP: 2000 Toyota Solara SLE
User avatar
ArizonaEagle07
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 265
Joined: Sat Sep 24, 2005 6:34 pm
Location: New Freedom, PA
Top

Postby funboy102 » Fri Mar 27, 2009 4:03 pm

ArizonaEagle07 wrote:May I ask what is the purpose of cutting the bump stop?


+1, what is the reason? I didn't cut mine and it's all good.
Image
1999 Solara SE V6 5-Speed PICS! http://www.solaraguy.com/viewtopic.php?t=43759
User avatar
funboy102
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1051
Joined: Mon Jun 19, 2006 7:32 pm
Location: Pensacola, FL
Top

Postby nemoxfishy » Fri Mar 27, 2009 4:06 pm

Thx guys~!
the job is done!!

^Bump stops prevent your shocks from banging onto the chassis when you bottom out. However, with shorter aftermarket springs we will bottom out early if we don't cut the bump stops.
Image
User avatar
nemoxfishy
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 309
Joined: Fri Dec 01, 2006 6:51 am
Location: BC, Canada
Top

Postby SleeperSolara » Fri Mar 27, 2009 9:39 pm

I think i had cut my bump stops in half and used the top half since it had a bigger base.
2000 Solara SE auto V6. Diamond White Pearl.
Top Speed Run finished at 130 mph. :o
Too many modifcations for the signature.
User avatar
SleeperSolara
SolaraGuy Hall of Famer
SolaraGuy Hall of Famer
 
Posts: 9257
Joined: Tue Jun 15, 2004 11:38 am
Location: The 405
Top

Postby LEE337 » Sat Mar 28, 2009 6:43 am

I cut my bump stops in half as well when I put my Teins in.
Texas SolaraGuy Meet
Image
User avatar
LEE337
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1335
Joined: Thu May 01, 2008 11:16 pm
Location: Waco, TX Home of Dr. Pepper
Top
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 33 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net