4cyl Fujita Cold Air Intake

by **ctsolara12** » Wed Oct 08, 2008 3:36 pm

I went ahead and peeled back the splash guard in that lower left corner (where the filter will go) and took pictures. The opening appears to be large enough and very similar to the camry. I can't seem to find whether it's a 2.5" tube or 3"...

Overall view (fog light on top left, the opening is to the right where you can see the fan):

Closer view of the opening (you can see that white plastic that is part of the current intake, which will go away):

A sideways (sorry) view of the opening from down low:

by **kingkakyle** » Wed Oct 08, 2008 4:40 pm

im so disoriented lol
at first i was thinking the camry was a 3mz v6....but its an 07 so its a 2gr.... (the dyno)....but 140s is pretty good for just intake
keep us updated!!

by **ctsolara12** » Thu Oct 09, 2008 8:47 am

I'll make sure to keep you updated if I go ahead and get it.

Anyone notice that the MAF on the camry has screws in opposite corners, meaning I would have to rotate mine 90degrees?

I took a look at my MAF yesterday and I was wondering if the sensors placement has to remain the same.

by **kingkakyle** » Thu Oct 09, 2008 7:15 pm

i dont think u can turn ur maf? cuz then the air wont pass through it correctly
im so temped to buy one!!! but i said to myself im done modding the car =P
whats the best price uve gotten?

by **Midias** » Thu Oct 09, 2008 7:53 pm

ctsolara12 wrote:I'll make sure to keep you updated if I go ahead and get it.

Anyone notice that the MAF on the camry has screws in opposite corners, meaning I would have to rotate mine 90degrees?

I took a look at my MAF yesterday and I was wondering if the sensors placement has to remain the same.

Maybe I just suck but the look like the same corners to me.

I just checked part numbers and the 02-06 camry and 02-08 solara share the same maf

by **ctsolara12** » Thu Oct 09, 2008 8:29 pm

Upon some research, the sensor has a set airflow direction, so it would not be good to rotate it.

This intake is for the 07-08 6th gen camry, not 5th gen. If you look closely at the two pictures in my first post you can see that the screws on the maf sensor are in the opposite corners. I could always drill new holes in the intake, although I don't want to screw it up lol.

Best price for the intake I've found is at fujitaonline.com for 255.05 with a 10 dollar cupon.

by **Ruski** » Thu Oct 09, 2008 8:37 pm

damn 255 thats a bit High

4cyl Fujita Cold Air Intake

Who is online