Exhaust

[lilm]

So what is everyone running?

Ive got 2.25 jpp headers a x pipe and two trd mufflers just sitting in my room and i cant decide what to do....


S/C guys only please

[Dawgz]

So what is everyone running?

Ive got 2.25 jpp headers a x pipe and two trd mufflers just sitting in my room and i cant decide what to do....


S/C guys only please

OEM Federal spec headers + Dats ypipe + Greddy Evo II...


soon to be OBX JPP copy headers/ypipe, but keeping the Greddy Evo II Cat Back.

[TRDSleeper]

two TRD mufflers? You should sell one of them to make some money. Right now I am only running the TRD sport muffler with stock headers. In the future I will get the whole JPP set up.

[Midias]

Federal headers, Dat custom Y pipe, Thunderbolt OBD2 highflow cat, 2.5 inch stainless exhaust with dual resonators and trd muffler.


crap I missed the SC only thing but my setup would work just fine for that too. Just look left and forget forget.....

[Mr_Chunkz]

JPP Headers, JPP Y Pipe, JPP Catback with high flow cat, Custom Apex World Sport Muffler 3" Turbo Inlet on Muffler.

Difference between this and my old JIC 2.3" Catback = Tons more top end HP
And the bottom end torque you "sacrifice" is hardly noticeable.

[akora12]

Full OEM intake and exhaust here.

You should sell one of those TRD mufflers to me and use the rest.

[Ilovemylara]

oem headers, high flow cat, straight pipe with a resonated tip

[lilm]

well the plan was to do true duals through a x pipe and ending in both trd mufflers but i just cant find a shop that will do it for less than a thousand bucks.....it would be so much easier to use the jpp headers to a 3'' collector and run some other kind of muffler.....i just cant decide what to do

[stone23]

i have oem headers and y pipe 3"catback with magnaflow muffler

[funboy102]

well the plan was to do true duals through a x pipe and ending in both trd mufflers but i just cant find a shop that will do it for less than a thousand bucks.....it would be so much easier to use the jpp headers to a 3'' collector and run some other kind of muffler.....i just cant decide what to do

In order to do a true dual set up, you can't have a y-pipe right? Where did you find a X-pipe for the 1mz-fe?

[lilm]

its just a generic x pipe

[CASTRO]

well the plan was to do true duals through a x pipe and ending in both trd mufflers but i just cant find a shop that will do it for less than a thousand bucks.....it would be so much easier to use the jpp headers to a 3'' collector and run some other kind of muffler.....i just cant decide what to do

In order to do a true dual set up, you can't have a y-pipe right? Where did you find a X-pipe for the 1mz-fe?

Only other person here who has done true dues with an X-pipe was paladingreg. He had his full custom and I believe he used an xpipe for mustangs. wait, it mighta been an H pipe, oh whatever lol

[lilm]

yep only true dual was greg alot before he sold his car(if i do go true dual it will be modled after his car ive got pictures and everything lol). But being that i probably wont go over 5.5 psi im thinking that the pipes would be to big and there would be no backpressure at all equalling a loss in performance

[99V6solaraSE]

xerd racing long tube headers, 3inch jp exhaust

[Midias]

I think if you went 2.25 or 2 inch with full x pipe and a single resonator each you will be very happy.