[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Stand alone ecu
For those looking for more speed through force. Forced Induction; Supercharger,Turbocharger or Nitrous discussion and maintenance.

Stand alone ecu

Stand alone ecu

Postby tucky » Fri Nov 07, 2008 1:18 pm

Hi, it's been a while since I've been on. Hope eveyone is well.

I've gone stand alone ecu, it's a link G4 storm. Had the car mapped today. The car has had a misfire for sometime now, the plugs and ignitor have been replaced and all seemed well on the journey down to the rolling road.

As soon as the car went on the rollers it developed a misfire, the plugs were checked and so were the coils. Still misfired, so Ryan (the mapper) checked the coil pack connection plugs and low and behold we had full power, no missing.


The car had been on the dyno for about 2 hours and was running hot. It made 282.9 bhp. Ryan says the injectors are maxed out, so I'm looking at putting the soup 440cc's in. He thinks we should hit the 300 bhp mark. He also says if the car had been cold and it was just a dyno run it would have shown more power.

Image

We took the car up the road after the mapping session and what can I say. The car has never been as smooooth, responsive. Every aspect of the driving the car is so much better, my rough diamond has now been polished. Top job mate, thanks :thumbsup:

Image

Image
tucky
Just Licensed SolaraGuy
 
Posts: 36
Joined: Wed Dec 20, 2006 12:40 pm

Postby Dawgz » Fri Nov 07, 2008 3:50 pm

nice numbers for sure...does ur mr2 have the 1mz swap? I dont recall what you have done to it....
--=Black on Black=-- (Sold)
User avatar
Dawgz
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4678
Joined: Fri Jul 16, 2004 2:28 pm

Postby tucky » Fri Nov 07, 2008 3:58 pm

Hi mate, yes it's a 00 1mz.
tucky
Just Licensed SolaraGuy
 
Posts: 36
Joined: Wed Dec 20, 2006 12:40 pm

Postby Midias » Fri Nov 07, 2008 4:01 pm

Dawgz wrote:nice numbers for sure...does ur mr2 have the 1mz swap? I dont recall what you have done to it....



http://www.solaraguy.com/viewtopic.php? ... highlight=
User avatar
Midias
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3550
Joined: Sun Jul 18, 2004 8:06 pm
Location: Rochester NY

Postby Dawgz » Fri Nov 07, 2008 5:29 pm

o sweeet!
--=Black on Black=-- (Sold)
User avatar
Dawgz
SolaraGuy Professional Racer
SolaraGuy Professional Racer
 
Posts: 4678
Joined: Fri Jul 16, 2004 2:28 pm

Return to Forced Induction

Who is online

Users browsing this forum: No registered users and 3 guests