CUSTOM EXHAUST PIPING PRICE?

by **M_ABILLONES** » Wed May 07, 2008 8:00 am

I went to a performance shop here in Mountainside, NJ for a custom 2.5" catless catback piping and they are charging me $650 for the set up. Is that too much?

Also, is there something I can use to paint the piping to prevent rusting and corroding?

Mark

by **woa_its_j3ff** » Wed May 07, 2008 8:26 am

thats way too much.

a shop here can make a full custom catback in any way of your liking ranging from 200-350 at most.

by **CamryOnBronze** » Wed May 07, 2008 8:30 am

that is a bit too expensive for a catback. Jeff's price is a lot closer to what you should be paying. They sell high temp paint and coating that you could spray the exhaust with to prevent rusting. good luck!

by **M_ABILLONES** » Wed May 07, 2008 8:31 am

and do you guys spray something or paint something on the piping to prevent rust and corrosion?

I thought that 650 is way too high...a friend of mine recommended me to the shop so i thought I'd check it out!

Once i go catless I'm going to buy a CEL Fix right?

by **Dawgz** » Wed May 07, 2008 8:37 am

M_ABILLONES wrote:and do you guys spray something or paint something on the piping to prevent rust and corrosion?

I thought that 650 is way too high...a friend of mine recommended me to the shop so i thought I'd check it out!

Once i go catless I'm going to buy a CEL Fix right?

I may be selling my Greddy EVO II Full Catback exhaust soon....im pricing it waaaaay below 600 haha.

Im in NJ too. If ur interested, contact me via PM, we can talk.

by **Midias** » Wed May 07, 2008 8:39 am

For 650 it damn well better be stainless steel so it will never corrode.

For non stainless go alumnised with some 1200 degree paint. Also clean the pipe really well first with acetone or something similar.

by **ptballer** » Wed May 07, 2008 8:30 pm

I can get it done for $60 in Queens thats waaaaaaayyy too much.

by **Midias** » Thu May 08, 2008 5:18 am

I built a custom mild steel one for 80 dollars in parts including a resonator.

by **M_ABILLONES** » Thu May 08, 2008 7:40 am

In Queens? Where in Queens? I'm about an hour away from that area. I used to buy all my JDM stuff for my WRX @ Fizz Autosports. For $60 does that come with the rust/corrosion protection already?

Also, this custom piping will fit with the JPP Headers & Catless Y-Pipe?

Thanks,

Mark

by **Midias** » Thu May 08, 2008 7:43 am

If you are in NY spend the extra money go stainless my ceramic coated exhaust fell apart from NY winters way too quickly.

CUSTOM EXHAUST PIPING PRICE?

CUSTOM EXHAUST PIPING PRICE?

Who is online