manual swap no reverse lights..

by **supamouse09** » Fri Oct 07, 2005 11:53 pm

hey i did the manual swap and i forgot that after the swap my reverse light arent working? is there anyway to wire it up to work?? im running the auto ecu still. funny idle because it thinks its always in neutral. is that why my reverse lights dont work??

by **SC V6** » Sat Oct 08, 2005 7:28 am

on the manual tranny there should be a reverse sensor... it will have two wires coming out of it, and one is a ground, and the other is a power if I remember.. and it has to be spliced into the old auto connecter... ill see if I can't get a pic or 2

by **SC V6** » Sat Oct 08, 2005 7:31 am

what did you do to trick the ecu so you don't get shift selonoid errors and reverse switch codes?

I've got a few tips if you want them...

by **StockSolara** » Sat Oct 08, 2005 1:09 pm

How much did it cost for parts and labor? I been wanting to do this for a long time now

by **SleeperSolara** » Sun Oct 09, 2005 2:28 pm

StockSolara wrote:How much did it cost for parts and labor? I been wanting to do this for a long time now

I think it about a grand to 2 grand to get it done.

by **SPF 0** » Sun Oct 09, 2005 3:41 pm

Don't forget a likely drop in your car's resale value as well. Important when you're adding up what the project will <i>really</i> cost.

by **supamouse09** » Tue Oct 11, 2005 9:05 pm

any luck with those pics scott??

by **i20solara02i** » Tue Oct 11, 2005 10:11 pm

SPF 0 wrote:Don't forget a likely drop in your car's resale value as well. Important when you're adding up what the project will <i>really</i> cost.

not if you plan on keeping your solara. :evilbat:

by **SPF 0** » Wed Oct 12, 2005 7:57 am

rufus129 wrote:not if you plan on keeping your solara.

Unless you plan to drive it until it's only suitable for a scrapyard, it'll have an affect.

by **SC V6** » Wed Oct 12, 2005 8:33 am

supamouse09 wrote:any luck with those pics scott??

no I forgot completly... send me a PM on friday, and I will try to snap a few pics... its not that bad... do you have the reverse sensor that is plugged into the tranny?

by **StockSolara** » Wed Oct 12, 2005 11:26 am

http://tt-cc.com/ratko/swap/index.html
This might help you out with the wiring

by **SC V6** » Wed Oct 12, 2005 11:55 am

yeah thats what I used... but keep in mind he has a camry... I ended up having to checking the wiring diagrams in my chiltons

by **SC V6** » Wed Oct 12, 2005 12:30 pm

by the way.. hows it running? Get the CEL's taken care of so you run w\o CEL's?

by **Midias** » Fri Oct 14, 2005 1:57 pm

I just replaced mine it was $26 at advance auto parts

manual swap no reverse lights..

manual swap no reverse lights..

Who is online