Limited V6 Exhaust Ypipe 1MZ *Update-Back 1 last time*

by **hskrsolara** » Wed Dec 27, 2006 11:11 am

When you get it back, please post pics and exact measurements of how far you moved the flex back to make it fit.

by **DatSRBoi** » Wed Dec 27, 2006 11:14 am

Midias wrote:ok UPDATE I went to a place called EJP welding and the guy who runs it said he could fix it no problem I should have it by the first.

Thats one relief. Tell you how you feel with it.

by **Midias** » Wed Dec 27, 2006 1:22 pm

DatSRBoi wrote:
Midias wrote:ok UPDATE I went to a place called EJP welding and the guy who runs it said he could fix it no problem I should have it by the first.

Thats one relief. Tell you how you feel with it.

Don't worry I will make sure to tell me how I feel about it and you guys as well. He said he could move it down about 3 inches.

by **facevedo17** » Wed Dec 27, 2006 3:14 pm

Thats totally wicked!!!!!!!!!!

by **Akfahad** » Wed Dec 27, 2006 5:40 pm

Midias wrote:
DatSRBoi wrote:
Midias wrote:ok UPDATE I went to a place called EJP welding and the guy who runs it said he could fix it no problem I should have it by the first.

Thats one relief. Tell you how you feel with it.

Don't worry I will make sure to tell me how I feel about it and you guys as well. He said he could move it down about 3 inches.

So your having the guy cut the pipe before the flex section and moving it 3 inches? Just want to make sure I get this right in case I have to do the same thing.

Also, is everybody having this problem or just some of you?

by **Midias** » Wed Dec 27, 2006 6:35 pm

Akfahad wrote:
Midias wrote:
DatSRBoi wrote:
Midias wrote:ok UPDATE I went to a place called EJP welding and the guy who runs it said he could fix it no problem I should have it by the first.

Thats one relief. Tell you how you feel with it.

Don't worry I will make sure to tell me how I feel about it and you guys as well. He said he could move it down about 3 inches.

So your having the guy cut the pipe before the flex section and moving it 3 inches? Just want to make sure I get this right in case I have to do the same thing.

Also, is everybody having this problem or just some of you?

I am having the flex cut out and the pipe after it welded where the flex was then the flex will be placed right before the flange. Kinda the old switcheroo. LIKE this photoshop

by **Akfahad** » Thu Dec 28, 2006 2:21 pm

^^^gotcha...everyone else having issues, or just a couple of you?

by **Midias** » Thu Dec 28, 2006 2:27 pm

Akfahad wrote:^^^gotcha...everyone else having issues, or just a couple of you?

everyone

by **ndeguzma** » Thu Dec 28, 2006 2:43 pm

Midias wrote:
Akfahad wrote:^^^gotcha...everyone else having issues, or just a couple of you?

everyone

Mcthings got his to work some how.

http://www.cardomain.com/ride/2286658

Anybody know how to get a hold of him?

I won't start mine until this get sorted. Look forward to the adjustment measurements.

by **Midias** » Thu Dec 28, 2006 2:47 pm

ndeguzma wrote:
Midias wrote:
Akfahad wrote:^^^gotcha...everyone else having issues, or just a couple of you?

everyone

Mcthings got his to work some how.

http://www.cardomain.com/ride/2286658

Anybody know how to get a hold of him?

I won't start mine until this get sorted. Look forward to the adjustment measurements.

He took his to an exhaust shop and asked them to make it work. Looks like they added a few welds near the rear flange from what I can see.

by **DatSRBoi** » Thu Dec 28, 2006 5:50 pm

Probably my last post. People accusing me of lieing and crap on here so Im sick and tired of this bs. If anyone got any problem or need email me. But Im deleting time here.

by **Midias** » Thu Dec 28, 2006 7:11 pm

DatSRBoi wrote:Probably my last post. People accusing me of lieing and shimmy-slimmy-schlock on here so Im sick and tired of this bs. If anyone got any problem or need email me. But Im deleting time here.

Shit7y man good luck on other boards

by **hskrsolara** » Thu Dec 28, 2006 10:59 pm

DatSRBoi wrote:Probably my last post. People accusing me of lieing and shimmy-slimmy-schlock on here so Im sick and tired of this bs. If anyone got any problem or need email me. But Im deleting time here.

I think you know that we all agree that it was an honest mistake...well at least I do. Now, what can you guys do on your end to help us out on getting it modified to work? Service after the sale is something that comes along with selling anything, I have to do it every day, but its just something you gotta do. Midias, what did your shop quote you to cut, re-weld? Dat, what are you willing to do on your end to help us out? I will be taking mine in to get fixed here in January, so I would like to have this figured out by then. You know I'm not attacking you, and I know you already feel like crap, so lets work this out respectfully. You can post here or just pm. Later.

by **Midias** » Fri Dec 29, 2006 4:52 am

hskrsolara wrote:
I think you know that we all agree that it was an honest mistake...well at least I do. Now, what can you guys do on your end to help us out on getting it modified to work? Service after the sale is something that comes along with selling anything, I have to do it every day, but its just something you gotta do. Midias, what did your shop quote you to cut, re-weld?

Midias wrote:ok UPDATE I went to a place called EJP welding and the guy who runs it said he could fix it no problem I should have it by the first.

No quote he sait it would be relatively low cost and I want to see what kind of guy he is so we will see.

by **hskrsolara** » Fri Dec 29, 2006 10:07 am

gotcha, thanks.

Limited V6 Exhaust Ypipe 1MZ Update-Back 1 last time

Who is online