385whp and 397wtq on trd supercharger

[Gregtrd]

I figured I post here for those that aren't on Facebook
Albertrd trd supercharger solara 385whp 397wtq @15 psi stock block just
Lots of bolt ons.

[albertrd]

I figured I post here for those that aren't on Facebook
Albertrd trd supercharger solara 385whp 397wtq @15 psi stock block just
Lots of bolt ons.

That's right ladies peep it when y'all get a chance

[Akfahad]

15psi? I thought anything above 7-8psi was counterintuitive (sp?) since it generates too much heat??? Was this done at Church's on the Hub Dyno? Got any details Greg...i.e. what he's using to tune and the other bolt on's? I pretty much have every bolt on you can think of, curious to know what else he's got.

[Gregtrd]

It a whole new ball game when you're pushing 1650ml of water/ meth thru the trd supercharger
After 10 dyno pulls the s/c feels like it just came out of a refrigerator, even the valve covers are cool.
If you want to make these kind of numbers, Then it's all about the setup. 1.9" pulley, you need a
Tight pulley rap (custom pulley plate) 3mz swap. There's numbers are on a set of 330cc supra injectors btw.
The solara set up is a replica of my camry.

[Gregtrd]

Are you auto or manual what's your parts list?

[Toy1mzfe]

Saw the vids on instagram. Beastly.

[albertrd]

It a whole new ball game when you're pushing 1650ml of water/ meth thru the trd supercharger
After 10 dyno pulls the s/c feels like it just ca me out of a refrigerator, even the valve covers are cool.
If you want to make these kind of numbers, Then it's all about the setup. 1.9" pulley, you need a
Tight pulley rap (custom pulley plate) 3mz swap. There's numbers are on a set of 330cc supra injectors btw.
The solara set up is a replica of my camry.

BTW stock internals ladies

[Akfahad]

It a whole new ball game when you're pushing 1650ml of water/ meth thru the trd supercharger
After 10 dyno pulls the s/c feels like it just came out of a refrigerator, even the valve covers are cool.
If you want to make these kind of numbers, Then it's all about the setup. 1.9" pulley, you need a
Tight pulley rap (custom pulley plate) 3mz swap. There's numbers are on a set of 330cc supra injectors btw.
The solara set up is a replica of my camry.

Manual trans. running everything i need to include two, Snow Stage 2 MAF Meth injection, with the nozzle's before and after the throttle body but nothing directly tapped into the SC. I forget the ml of the nozzle's but wanna say a 165 and a 75ml.

Besides the pulley plate that came with the SC, I'm assuming you're talking about something beefier?

[Akfahad]

there's the key....3MZ swap. Negative on that one.

[Gregtrd]

1mzfe was running 390wtq and 340whp at 10psi,
15psi on a 1mzfe would do at least 360-370 whp.

[Gregtrd]

You could make the 3mz smog legal by making a egr cooler, I did Toms 3mz s/c auto
pass state smog with flying colors at 12psi.

[Akfahad]

taking this to PM Greg.

[Gregtrd]

Pm'ed

[EkiMucH]

Hi Greg is Tom in the SG forums? I want to get a hold of him...

[Gregtrd]

No, he's on Facebook (Tom Tran)