Seeking option to go 6 PSI with my S/C Camry

[John Su]

YEAR:
2005
Hi all here is my 05 Camry in Australia , now I am Seeing option to upgrade mods to go 6 Psi. please give me some recommendations for parts and web links where to buy tips that will be great !
what am I having @the moment is :

ENGINE :
3.0 V6 Auto 1mz-fe
TRD Supercharger @ 4PSi
APEXi S-AFC II installed

EXHAUST:
OBX header + high flow CAT+ X Force Varex Muffler
Air intake -Injen SAI
* My car original come with a transmission cooler

SUSPENSION & HANDLING:
KYB EX-G *4 + King Lower Springs
White Line Sway Bar

WHEELS TYRES & BRAKES
Good Year DV F1 245/45/18
Twin Piston brake caliper + 320mm Rotor

Org Sportivo clutch , Fuel pump , I have a in tank fuel filter


Any help here will be thanked

[1gSE]

Judging by your mod list, I'd say the only thing you would need are injectors (re-manufactured oem 2JZ-GE), fuel pump (a 190lph walbro) and maybe a transmission cooler. Do you have a wide band O2 sensor because you'll definitely need it?

[ToyoSolV6]

Judging by your mod list, I'd say the only thing you would need are injectors (re-manufactured oem 2JZ-GE), fuel pump (a 190lph walbro) and maybe a transmission cooler. Do you have a wide band O2 sensor because you'll definitely need it?

Dont forget a meth kit too

[1gSE]

I honestly believe 315s and a 190 would be more than enough (I've seen as rich as 9.5 on my wide band but I have a 255 walbro) so there's plenty of fuel. I'm not bashing meth kits, hell I run one, but for cooling only. Ditching the SAFC2 for something that will allow control of ignition advance will let him get the full potential of meth.

[John Su]

Judging by your mod list, I'd say the only thing you would need are injectors (re-manufactured oem 2JZ-GE), fuel pump (a 190lph walbro) and maybe a transmission cooler. Do you have a wide band O2 sensor because you'll definitely need it?

Dont forget a meth kit too

Judging by your mod list, I'd say the only thing you would need are injectors (re-manufactured oem 2JZ-GE), fuel pump (a 190lph walbro) and maybe a transmission cooler. Do you have a wide band O2 sensor because you'll definitely need it?

Great Great Great help here ~ I will plan to mod about the injectors and fuel pump ! Yes my ride does have a transmission cooler . I don't have wide band o2 sensor, do you have any links for that products ? i will think about a meth kit too Question about my Sportivo clutch , do you guys think it will be OK for the upgrade ? As the pic show above i did block the EGR, the result is my engine lights is on , checked already it is the EGR thing! Do you have any ideas to turn the lights off ?

Thanks
John

[Bostonlara]

10k ohm resistor for the egr. Clutch should be ok if it's a upgraded one

[SolaraPete]

The resistor trick has been pretty well discussed on here and it doesnt work as far as shutting off the CEL. The problem is that the ECU needs to see several different resistances during a run cycle, so one resistor value doesnt solve the problem. Ive personally tried it as well as sev others - you either need to live with the CEL light on, take out the bulb, or put the egr back in.

[trentmeyer23]

What clutch? It's an auto...

[SolaraPete]

Must be a super rare model with the 'clutch pedal delete' option package.....