[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSK/3.0/no DST' instead
SolaraGuy.com • View topic - Gas Gauge not working?

Skip to content

Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.
Post a reply

Gas Gauge not working?

Gas Gauge not working?

Postby Hsakuragi » Wed Nov 26, 2003 1:18 am

I need some help here, after I install a new circut board on the speedometer, it seems like the gas gauge is not working anymore, no matter how many miles i drove, it's just stay at the same level, anyone can help? the good thing is i know how many mile the car runs per gallon on average..but ...yea..help... :cry:
The ONE & ONLY Fully Loaded 2006 X Avalon Limited with Body Kit in CA = Special Limited Edition + First 2GR-FE rebored the throttle body (i think...)

Image
Hsakuragi
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3509
Joined: Sun Dec 29, 2002 10:50 pm
Location: Bay Area, CA
Top

Postby Mole » Wed Nov 26, 2003 1:30 am

i think about 340.

not even the reserve light will come on?
the power of 8
User avatar
Mole
molerator
molerator
 
Posts: 1677884
Joined: Sun Apr 20, 2003 12:25 pm
Location: Glendale, Ca
Top

Postby kubi » Wed Nov 26, 2003 1:43 am

Did you buy the new one used or new? If you got it used maybe they were selling it because the gas gauge didn't work? Kind of sleezy but you never know!
Please stop humping my car, owner privilege!
kubi
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 696
Joined: Mon Mar 17, 2003 8:41 am
Location: Kalamazoo, MI
Top

Postby impactX » Wed Nov 26, 2003 3:13 am

Why did you install a new circuit board?
impactX
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 958
Joined: Thu Nov 21, 2002 9:06 pm
Top

Postby Hsakuragi » Wed Nov 26, 2003 9:59 am

EVERYTHING OTHER thing is fine, lights working, temp stay normal when normal and cold when is cold, i just replaced the circut board (the green sheet on the back of the speedometer...and i'm using my own one...i tried using different screws, but it's the same...
The ONE & ONLY Fully Loaded 2006 X Avalon Limited with Body Kit in CA = Special Limited Edition + First 2GR-FE rebored the throttle body (i think...)

Image
Hsakuragi
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3509
Joined: Sun Dec 29, 2002 10:50 pm
Location: Bay Area, CA
Top

Postby impactX » Wed Nov 26, 2003 11:29 am

I would take out the green sheet and put it back again and make sure all connections are good.
impactX
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 958
Joined: Thu Nov 21, 2002 9:06 pm
Top

Postby Hsakuragi » Wed Nov 26, 2003 12:19 pm

actually i did...it's the same...but anyone had experience with this?
The ONE & ONLY Fully Loaded 2006 X Avalon Limited with Body Kit in CA = Special Limited Edition + First 2GR-FE rebored the throttle body (i think...)

Image
Hsakuragi
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3509
Joined: Sun Dec 29, 2002 10:50 pm
Location: Bay Area, CA
Top

Postby Hsakuragi » Fri Nov 28, 2003 10:26 am

really no one? :(
The ONE & ONLY Fully Loaded 2006 X Avalon Limited with Body Kit in CA = Special Limited Edition + First 2GR-FE rebored the throttle body (i think...)

Image
Hsakuragi
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3509
Joined: Sun Dec 29, 2002 10:50 pm
Location: Bay Area, CA
Top

Postby impactX » Fri Nov 28, 2003 12:35 pm

Nope, why would you replace that thing in the first place??

Why not put the original back in
impactX
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 958
Joined: Thu Nov 21, 2002 9:06 pm
Top

Postby Hsakuragi » Fri Nov 28, 2003 2:59 pm

the circut board was burnt
The ONE & ONLY Fully Loaded 2006 X Avalon Limited with Body Kit in CA = Special Limited Edition + First 2GR-FE rebored the throttle body (i think...)

Image
Hsakuragi
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3509
Joined: Sun Dec 29, 2002 10:50 pm
Location: Bay Area, CA
Top

Postby Yanks0114 » Fri Nov 28, 2003 5:25 pm

Did you touch the needles at all when u changed the circuit board.

When I installed white face gauges on my friends mustang, the gas needle was put on too hard and it wouldn't move. If thats the case, fill up and then put the needle on lighter
Yanks0114
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 4756
Joined: Sat Aug 24, 2002 12:01 am
Top

Postby Hsakuragi » Fri Nov 28, 2003 11:13 pm

no, i only change the green board where the light bulbs were..i haven't touch the needle, maybe it's the screw...which i don't think the problem...can someone here works for toyota and ask about it? I'm very desperate on this..thanks y'all
The ONE & ONLY Fully Loaded 2006 X Avalon Limited with Body Kit in CA = Special Limited Edition + First 2GR-FE rebored the throttle body (i think...)

Image
Hsakuragi
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3509
Joined: Sun Dec 29, 2002 10:50 pm
Location: Bay Area, CA
Top
Post a reply

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 8 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net