[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Installing NST underdrive pulley

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

Installing NST underdrive pulley

Installing NST underdrive pulley

Postby chullen1 » Sun Jun 05, 2011 4:12 pm

I am gonna use a 1/2" impact to get the crank pulley out but want to know what some of you think about using a impact to put it back in or should I use a torque wrench?
chullen1
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 275
Joined: Mon Jun 30, 2008 4:04 am
Location: Baltimore
Top

Re: Installing NST underdrive pulley

Postby Akfahad » Sun Jun 05, 2011 5:53 pm

tq. wrench
User avatar
Akfahad
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2738
Joined: Tue Jan 28, 2003 9:13 am
Location: NJ
Top

Re: Installing NST underdrive pulley

Postby chullen1 » Sun Jun 05, 2011 7:14 pm

Any one know the torque spec for the crank pulley
chullen1
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 275
Joined: Mon Jun 30, 2008 4:04 am
Location: Baltimore
Top

Re: Installing NST underdrive pulley

Postby chullen1 » Sun Jun 05, 2011 7:23 pm

I only have a torque wrench that goes up to 150 ft/lbs
chullen1
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 275
Joined: Mon Jun 30, 2008 4:04 am
Location: Baltimore
Top
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 15 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net