[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - question -belt size

Skip to content

For those looking for more speed through force. Forced Induction; Supercharger,Turbocharger or Nitrous discussion and maintenance.
Post a reply

question -belt size

question -belt size

Postby 808lara » Mon May 30, 2011 11:46 am

what size drive belt is needed when switching to a 2.9" (5.5 psi) supercharger pulley?
808lara
Just Licensed SolaraGuy
 
Posts: 27
Joined: Fri Jul 02, 2010 12:36 am
Top

Re: question -belt size

Postby hskrsolara » Mon May 30, 2011 6:05 pm

viewtopic.php?f=23&t=51536&start=15
99 DWP SEV6 5spd 6.5psi+Meth, Tein+Tokico, EricSol+Brembos+EBC, OBX Headers+OBX 3" Exhaust, Supra MAF & 330cc, Spec 2+, Fidanza, TRD lip kit, Injen+Ext, Optima Red, Infinity 60.5+693.7i, 2 Kappa Perfect 12 VQ's+iPod+JVC DVD...etc
User avatar
hskrsolara
SolaraGuy Supporter
SolaraGuy Supporter
 
Posts: 3070
Joined: Tue Jan 25, 2005 12:04 am
Location: The Northland
Top

Re: question -belt size

Postby 808lara » Mon May 30, 2011 10:34 pm

hskrsolara wrote:http://www.solaraguy.com/viewtopic.php?f=23&t=51536&start=15

thanks for the reply-i read your thread earlier-does your supercharger have the dynamic tensioner? mine doesn.t and i believe that will affect the size of the belt that i will need?
808lara
Just Licensed SolaraGuy
 
Posts: 27
Joined: Fri Jul 02, 2010 12:36 am
Top

Re: question -belt size

Postby Gregtrd » Mon May 30, 2011 10:40 pm

With out the non tensioner set up the belt is smaller.
The Fastest Camry in Socal
366whp / 427wtq @10.5psi
Image
User avatar
Gregtrd
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1115
Joined: Thu Jul 28, 2005 2:14 am
Location: Fontana
Top

Re: question -belt size

Postby SirThomas88 » Sun Jun 12, 2011 9:35 pm

Hskrsolara says he used an 88.25" belt with his 5.5 pully.

I run a 5.5 pulley and auto tensioner, but I'm pretty sure I'm running a much smaller belt, I think somewhere between 87.2" and 87.7"

i'll check and get back to you.
Image
14.11s 101mph quarter mile. 5 Speed v6 Supercharged @ 5.5psi
SirThomas88
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 471
Joined: Mon Dec 07, 2009 9:37 pm
Location: Baltimore
Top
Post a reply

Return to Forced Induction

Who is online

Users browsing this forum: No registered users and 39 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net