Supra TT Big Brackets IN STOCK

[trd4life]

I have 8 sets of Supra TT Big Brake brackets in Stock. $180 shipped (in the u.s. only) which also includes hardware. Please add 2.9% paypal fees to your order. Grab them while they are here.




Uploaded with ImageShack.us

paypal is
gabe_potter@hotmail.com

Thanks

Gabe

[a94autocamry]

can you see if 16x7 +40mm offset will clear if possible...thanks

[mig0s]

can you see if 16x7 +40mm offset will clear if possible...thanks

80% sure you need at least 17's for those.

[a94autocamry]

yea I know people have always been saying you need at least 17's...but I'd figure if someone has those rim specs to test to see if it clears, then you got one customer here happy to buy this Supra TT kit

[SirThomas88]

Yea you need 17" wheels minimum. I have the same relocation brackets for the same BBK upgrade and I know I need 17" wheels

[KILLA CAM]

Gabe, why the price jump?

You spending too much money on those M90s?

[trd4life]

The cost of aluminum is up, and the cost of the hardware included with the kit also went up substantially.

[GreeKAvaLoN]

17's are a must, but these look GREAT




dont mind the curb rash or the clip that scraped a nice circle on the rotor haha. these work GREAT. everyone is amazed how well the avalon stops now (especially the guys with sports cars)

[yaddadaimsayin]

They look great. GLWS. Also, the kind of 17's you have will also make a difference. I have the D2's on my gen2 and the rims barely clear the calipers (like paper-thin clearance) so that I had to get spacers in the front for it. Enjoy!

[mig0s]

The cost of aluminum is up, and the cost of the hardware included with the kit also went up substantially.

The price of Aluminum actually dropped compared to 3 years ago. Aluminum has been relatively constant and cheap compared to other metals.

http://www.infomine.com/chartsanddata/c ... 7675&dr=3y

[hskrsolara]

^^well, inflation is up, driving the dollar down...leading to your dollar bill buying less imported aluminum than before.

[trd4life]

The cost of aluminum is up, and the cost of the hardware included with the kit also went up substantially.

The price of Aluminum actually dropped compared to 3 years ago. Aluminum has been relatively constant and cheap compared to other metals.

http://www.infomine.com/chartsanddata/c ... 7675&dr=3y

Are you saying my price is too high? KillaKam asked me a question and I answered it honestly based off what my machinist told me. Your response sounds like you do not believe my answer to his question. Please do not post in the for sale threads unless you have some genuine interest in these brackets. Either buy them or don't.
thanks

gabe

[mig0s]

The cost of aluminum is up, and the cost of the hardware included with the kit also went up substantially.

The price of Aluminum actually dropped compared to 3 years ago. Aluminum has been relatively constant and cheap compared to other metals.

http://www.infomine.com/chartsanddata/c ... 7675&dr=3y

Are you saying my price is too high? KillaKam asked me a question and I answered it honestly based off what my machinist told me. Your response sounds like you do not believe my answer to his question. Please do not post in the for sale threads unless you have some genuine interest in these brackets. Either buy them or don't.
thanks

gabe

I have no opposition of what price you sell your stuff at all! I am just stating the fact that the price of aluminum did not go up compared to 3 years ago. It was around 1.25$/lb and now it's below 1.20$/lb. Plus, how much of aluminum can there be in those brackets anyways? So I don't think the price of aluminum has any significant meaning in the price of these brackets.

They are nice though. I might get a set from you in the summer if you still have any left.

[solaraqueen]

17's are a must, but these look GREAT




dont mind the curb rash or the clip that scraped a nice circle on the rotor haha. these work GREAT. everyone is amazed how well the avalon stops now (especially the guys with sports cars)

u needed to shim the brake caliper bracket with shim stock, that solves the problem clip rub problem..........

[GreeKAvaLoN]

^ i realized that a bit after, if you guys use the dual piston calipers as well you'll need to grind down some of the caliper bracket, nothing serious. now that i think about it, i have to re grind that clip now that i put new clips in whatever the price of aluminum these are worth it!