gen1.5 solara SLE V6 sway bars diameter

[feniks]

can anybody post what are the diameters (in mm please) of both front and rear stabilizer/sway bars?

I'm trying to find right Energy Suspension bushings.

[02slera]

i think its 17mm front and 15mm or 16mm rear. but dont go buying anything based on that, anyone know for sure?

[feniks]

thanks.

I am trying to find confirmation for this model, but it's not easy heh...

[cartang]

Check the official aftermarket parts list by Midias , is there.

[feniks]

Check the official aftermarket parts list by Midias , is there.

a link please?

I cannot find what you mentioned.

[feniks]

i think I found something:
http://www.vehix.com/car-reviews/2002/t ... ifications

Stabilizer Bar Diameter - Front (in): 0.67
Stabilizer Bar Diameter - Rear (in): 0.63

for SLE V6 that would make 17mm front and 16mm rear.

for SE 2.2L it would be 17mm front and 15mm rear, like this:

http://www.vehix.com/car-reviews/2002/t ... ifications

Stabilizer Bar Diameter - Front (in): 0.67
Stabilizer Bar Diameter - Rear (in): 0.59

it seems no store carries 17mm Energy Suspension bushing+bracket hehe... rear 16mm is common, but for fronts they mostly sell upsized diamters (18mm and up).
I guess I will get Moog bushing inserts all around and call it a day.

[cartang]

Ok go to subforum( in Solaraguy ) Aftermarket upgrade 1-15. gen Solara , look for the post
OFFICIAL GEN 1-1.5 AFTERMARKET PARTS LISTINGPosted:
Posts: 3462
Location: Rochester NY

[feniks]

Ok go to subforum( in Solaraguy ) Aftermarket upgrade 1-15. gen Solara , look for the post
OFFICIAL GEN 1-1.5 AFTERMARKET PARTS LISTINGPosted:
Posts: 3462
Location: Rochester NY

if this is what you mean, then it doesn't help much as we are talking about STOCK/OEM bushing sizes, not aftermarket upgrades ...

viewtopic.php?f=2&t=37723

Whiteline (http://www.whiteline.com), (http://www.globalperformanceparts.com)
All Engines
Sway Bar Front (BTF38) 24mm
Sway Bar Rear (BTR39) 20mm
Front Springs (73119)
Rear Springs (78600A)
Strut Tower Brace (KSB508)


Energy Suspension (http://www.energysuspension.com)
99-03 All Engines
Front End Control Arm Bushing Set (8.3117)
Rear End Control Arm Bushing Set (8.3118)
Front Sway Bar Frame Bushings 18mm (9.5122)
Front Sway Bar Frame Bushings 19mm (9.5123)
Rear Sway Bar Frame Bushings 16mm (8.5120)

the best the stock setup can get is an Energy Suspension bushing insert (16mm) for rear sway bar on V6, so far I haven't found any polyurethane bushings for stock front application (17mm).

Other option is going with MOOG (federal Mogul) bushings, but they are rubber, maybe a little better over OEM.