[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - reverse glow gauges

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

reverse glow gauges

reverse glow gauges

Postby MarcoSolara02 » Sat Mar 20, 2010 1:14 pm

i bought some reverse glow gauges but they had no instructions and electronic stores in the valley say its too hard for them to put on, does anyone have a link on how to install them? thanks
User avatar
MarcoSolara02
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 194
Joined: Wed Mar 10, 2010 5:02 pm
Location: Los Angeles, CA
Top

Postby SdeA » Sat Mar 20, 2010 1:33 pm

http://www.solaraguy.com/viewtopic.php? ... ior+lights

Scroll down a bit and you should see the installation for the reverse gauge
User avatar
SdeA
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 730
Joined: Mon Apr 03, 2006 4:02 pm
Location: Garden Grove, So Cal
Top

Postby MarcoSolara02 » Sat Mar 20, 2010 5:26 pm

so i just unplug and plug the new ones back in? and the needeles i set alll to zero and the gas one to where it was before?
http://www.hayabusa.org/forum/attachmen ... ke_007.jpg

thats kinda how my wires look
User avatar
MarcoSolara02
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 194
Joined: Wed Mar 10, 2010 5:02 pm
Location: Los Angeles, CA
Top

Postby Chinky420 » Tue Mar 23, 2010 9:30 am

^^ yeah that's about it.

you're gonna need a phillips head screwdriver (a short "stubby" one works best)

two screws, then four screws (i think), then just pull it out. the plastic should pop off and then you unscrew the little black screws that hold on the guage faces.

install is reverse of removal.
took me about 20-30 minutes start to finish.
Chinky420
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1131
Joined: Thu Nov 16, 2006 4:32 pm
Top
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 29 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net