Help with GM knock sensor

[sarki]

Im having Greg do a knock sensor relocation on my car but need the part # of the proper GM sensor. Who can help me out. Thx

BTW i tried to do a search and all i got was a head ache.

[bbq bob]

i went to napa and just asked for a gm knock senser. then you will need the electic plug . greg will splice the new plug onto your harness.

[sarki]

I asked around and they wanted to know if it was a specific one or if i had a part #.

[ToyoSolV6]

ill send you a picture of mine sarki.
Take that to auto zone, kragen or napa.
and show them the one i have
I know when i went to auto zone to check they
had 3 different sensors. Two of the looked way
different than what i have. So if i send you the pic
tomorrow just show them and they should be
able to match it. I know they were able to find the
one i have with no problem.

[Mr_Chunkz]

I believe the plug which was used is off a late model Firebird/Trans am V6 but I could be wrong.

[cartang]

Hi look for the post " GM knock sensor # " all the terms.
anyway , this the part #s
-Wells SU 121
or Borg warner S 8803 . E mail Gabe he can get it .

[sarki]

^^^Hell ya thanks guys. That is the last item on my list.

[ToyoSolV6]

^^^Hell ya thanks guys. That is the last item on my list.

Damn Bro we gotta run it now!

[sarki]

Hi look for the post " GM knock sensor # " all the terms.
anyway , this the part #s
-Wells SU 121
or Borg warner S 8803 . E mail Gabe he can get it .

I would have hit Gabe up but i need it by Saturday. I'll check the Auto parts stores.

[Mr_Krispy1183]

^Do you have an EGR tube already?

[sarki]

^Do you have an EGR tube already?

Ya bro. Gabe hooked me up with a manual egr tube and a replacement cooler cover so i can swap out my auto cooler and adapt the manual tube. Does that make sense?

[trd4life]

yup Sarki, you have the manual EGR cooler and TRD manual EGR tube, your all set to go!

[sarki]

This should be a sticky because it has the part #'s for the Gm knock sensors you can use. JMO.