[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Pulley info

Skip to content

For those looking for more speed through force. Forced Induction; Supercharger,Turbocharger or Nitrous discussion and maintenance.
Post a reply

Pulley info

Pulley info

Postby RON » Mon Oct 26, 2009 9:00 pm

First off ,check this out....pulleys that minimize slip. You're going to definitely increase belt slip with smaller pulleys (undectable, except for loss of boost). This place can also MODIFY your own pully!

http://www.reichardracing.com/pulleys.php

Ultra Grip Pulley

Get rid of your Blower Slippage problem with our new ultra grip pulleys. Availible in 6, 8, 10, and 12 rib. We can modify your pulley or custom manufacture. Patent applied for. Call for details.

Now Available for ProCharger Ford and GM,.>>> Eaton<<<, 03' Cobra, Gen 2 Lightning, Magnusun Corvette, Whipple, Saleen Stage 1-4, Kenny Bell, Paxton, Vortech, Ford, and GM.

Image

Another link:

New Reichard Racing designed, Non-Slip Grooved Pulleys (2.76", 2.93" and 3.10") "Patent Pending"


http://www.billetflow.com/supercharger_pulleys.htm

Image

[/b]
Last edited by RON on Mon Oct 26, 2009 10:14 pm, edited 3 times in total.
User avatar
RON
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 517
Joined: Sun May 03, 2009 2:15 pm
Top

Postby RON » Mon Oct 26, 2009 9:57 pm

More pulley stuff..

Want to REALLY know your pulley size? Take a look>>

Image

Here's what you do. Take a measuring tape (better with mm, then convert) and tightly wrap it around the middle of the pulley itself. Yes..you'll need it *in your hands" or take the belt OFF. This will give you the circumference around the ridges. Divide by 3.14>>BINGO! There has been some debate as to what the STOCK pulley is, since many were marked *3.4"*. Mine is :wink: . Well, I used this method and>>>the diameter according to the drawing above (ridge to ridge) is >>>>>3.2"!
Last edited by RON on Mon Oct 26, 2009 10:13 pm, edited 1 time in total.
User avatar
RON
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 517
Joined: Sun May 03, 2009 2:15 pm
Top

Postby Akfahad » Mon Oct 26, 2009 10:12 pm

nice find!
User avatar
Akfahad
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2738
Joined: Tue Jan 28, 2003 9:13 am
Location: NJ
Top

Postby jetbtkng » Mon Oct 26, 2009 11:31 pm

underdog pullies are designed the same, i have 3 of them, 6,7,8 lb, i dont know if you knew that, wonder if they would make 2.4 in pully........... :drinking:
User avatar
jetbtkng
solaraguy idiot racing team
solaraguy idiot racing team
 
Posts: 1690
Joined: Sat Jan 10, 2009 4:20 pm
Location: bell garbage ca. so. cal.
Top

Postby akora12 » Tue Oct 27, 2009 5:20 am

Nice find, especially since URD doesn't make the supergrip pulleys for the M62 anymore.
Image
2000 Solara SEV6 5-speed S/C - Dismantled and sold :(
akora12
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1410
Joined: Tue Jan 16, 2007 5:12 pm
Location: FW IN
Top
Post a reply

Return to Forced Induction

Who is online

Users browsing this forum: No registered users and 32 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net