viper 791xv

by **MiistahSaan** » Sun Oct 11, 2009 4:35 pm

yeah i found it. i took it out. but i cant find the door trigger wire!! rawr!!!! where is it

by **MiistahSaan** » Sun Oct 11, 2009 5:07 pm

well. i took it out. but now i need help. i cant find the door trigger wire!!!! red and white?!?! where is it

by **kenny6683** » Mon Oct 12, 2009 9:11 am

just thought i'd share with you guys..i just spent a fortune on my alarm this past weekend. i got new viper alarm.

heres pic of my pager

my car key looks like yours...i dont have transponder key so bi pass was not needed however my car is manual and works perfectly with remote start

range on this one is amazing and some of the other features are cool as well. i can adjust the impact sensor right from the pager.

by **Ruski** » Mon Oct 12, 2009 9:55 am

check around the door jam, the door trigger is usually around that area since the alarm needs to sense that the door is closed. it should be a little push pin and tracj it back to the alarm

by **kenny6683** » Mon Oct 12, 2009 10:04 am

www.the12volt.com one of my favorite sites for this type of stuff

http://www.the12volt.com/installbay/ala ... /2124.html

^ Solara wiring info...door trigger on bottom right of Fuse panel

by **MiistahSaan** » Mon Oct 12, 2009 10:43 am

yeah after awhile we found it. me and my brother. but i had a question. my autostart doesnt work. we hooked up everything correctly. i had the aftermarket trasnponder, i took it out. now i dont need the chip to start the car. but i dont know. how can i get the autostart to work =[ shouldve taken it to a professional to isntall lol

by **MiistahSaan** » Mon Oct 12, 2009 10:43 am

kenny6683 wrote:just thought i'd share with you guys..i just spent a fortune on my alarm this past weekend. i got new viper alarm.

heres pic of my pager

my car key looks like yours...i dont have transponder key so bi pass was not needed however my car is manual and works perfectly with remote start

range on this one is amazing and some of the other features are cool as well. i can adjust the impact sensor right from the pager.

careful there. my cuzzin left his car in gear last time and remote start. almost crashed cuz it jumped lOL!

by **kenny6683** » Mon Oct 12, 2009 1:45 pm

actually the new viper alarms are very safe..you cannot use Remote start unless the car is in neutral and e-brake is on...it just wont work

regarding your problem...i made you this guide using the manual for your alarm...hope it helps

start off by cross reference what you already did..if everything matches then u know this is not the problem

by **krook** » Mon Oct 12, 2009 8:03 pm

is the a M/T or Auto? if it's an automatic tranny, you have to ground the skinny black/white wire on the alarm side.

if you already did that, then check the hoodpin (if you wired one in). as a safety, you cannot use the remote start feature if your hood is open/hoodpin is grounding out.

by **TLMNICK** » Mon Oct 12, 2009 9:39 pm

MiistahSaan wrote:yeah after awhile we found it. me and my brother. but i had a question. my autostart doesnt work. we hooked up everything correctly. i had the aftermarket trasnponder, i took it out. now i dont need the chip to start the car. but i dont know. how can i get the autostart to work =[ shouldve taken it to a professional to isntall lol

To get the car to start, you have to learn tach. If you don't do that, the car won't wanna start. Also, make sure that you have the small black/white wire permanently grounded (if its an automatic).
You can also refer to the tutorial I made a while ago about installing an alarm/starter in a camry/solara.

kenny6683, You made a good choice in security. I've been installing a lot of those lately, and they seem to work very well. I have one in my winter car, and so far it's been great.

by **MiistahSaan** » Mon Oct 12, 2009 10:40 pm

hahah. thx i will check it out this weekend when my bro have time.

viper 791xv

Who is online