Wheel Spacers

[akora12]

with stock suspension, I never rub believe it or not.

Wow, you're lucky LOL!

[D-money]

i have 5mm ebay specials all around with my stock 16s and they work great plus it only cost me 15 bux for all 4 LOL!!

[KILLA CAM]

Where can I get H&R spacers for the cheapest price at? I need to run spacers when I put on my skinny winter tires!

[indiglosolara]

Tracy..

I have a set of 25mm H&R spacers and a set of 15mm Spacers (project kics) in my garage. So before you commit to buy if you want to try them on let me know.

I can meet you at Gergs one day and play around with it. Just give me a call.

I also have a set of 5mm spacers.

All the spacers I have are Hubcentric to 60.1 hub bore and have the lips to hold the wheels center with the hub rings.

Although running spacers in good quality is ok. My thing is to NOT run spacer unless its really needed. Thats why I went out of my way to order wheels that had the offsets I wanted. And the exact reason I am rebuilding my Work wheels to how I want them to fit without spacers.

But I understand not everyone can find wheels specifically to what they want. Trust me I've been down that road.

[indiglosolara]

I order my Project Kics Spacers from Evasive Motorsports and my H&R I ordered from a friends shop.

[Toy1mzfe]

^^ does your 5mm have hub lips too?

Anyone willing to trade their 15mm for my 10mm?

[Mr_Chunkz]

Tracy..

I have a set of 25mm H&R spacers and a set of 15mm Spacers (project kics) in my garage. So before you commit to buy if you want to try them on let me know.

I can meet you at Gergs one day and play around with it. Just give me a call.

I also have a set of 5mm spacers.

All the spacers I have are Hubcentric to 60.1 hub bore and have the lips to hold the wheels center with the hub rings.

Although running spacers in good quality is ok. My thing is to NOT run spacer unless its really needed. Thats why I went out of my way to order wheels that had the offsets I wanted. And the exact reason I am rebuilding my Work wheels to how I want them to fit without spacers.

But I understand not everyone can find wheels specifically to what they want. Trust me I've been down that road.

hey kenny hit me up about pricing
i wont be able to mess around with the spacers till my car is up and running

[99BlackSandv6]

I prefer the factory fitment 16x6 with +45 offset. They are inset about 2 inches from the fender. It looks best in my opinion. And with stock suspension, I never rub believe it or not.

Just for the record, that was a joke. Except for the part about not rubbing, that's true.

[Mr_Chunkz]

I prefer the factory fitment 16x6 with +45 offset. They are inset about 2 inches from the fender. It looks best in my opinion. And with stock suspension, I never rub believe it or not.

Just for the record, that was a joke. Except for the part about not rubbing, that's true.

i didnt think anyone took it seriously

[indiglosolara]

Tracy..

I have a set of 25mm H&R spacers and a set of 15mm Spacers (project kics) in my garage. So before you commit to buy if you want to try them on let me know.

I can meet you at Gergs one day and play around with it. Just give me a call.

I also have a set of 5mm spacers.

All the spacers I have are Hubcentric to 60.1 hub bore and have the lips to hold the wheels center with the hub rings.

Although running spacers in good quality is ok. My thing is to NOT run spacer unless its really needed. Thats why I went out of my way to order wheels that had the offsets I wanted. And the exact reason I am rebuilding my Work wheels to how I want them to fit without spacers.

But I understand not everyone can find wheels specifically to what they want. Trust me I've been down that road.

hey kenny hit me up about pricing
i wont be able to mess around with the spacers till my car is up and running

well the spacers i have aren't for sale. I just thought you can use mine to try it out and see how they fit before you go buy yours.
I plan on keeping mine in case I need to put my stock wheels back on.

[Mr_Chunkz]

Tracy..

I have a set of 25mm H&R spacers and a set of 15mm Spacers (project kics) in my garage. So before you commit to buy if you want to try them on let me know.

I can meet you at Gergs one day and play around with it. Just give me a call.

I also have a set of 5mm spacers.

All the spacers I have are Hubcentric to 60.1 hub bore and have the lips to hold the wheels center with the hub rings.

Although running spacers in good quality is ok. My thing is to NOT run spacer unless its really needed. Thats why I went out of my way to order wheels that had the offsets I wanted. And the exact reason I am rebuilding my Work wheels to how I want them to fit without spacers.

But I understand not everyone can find wheels specifically to what they want. Trust me I've been down that road.

hey kenny hit me up about pricing
i wont be able to mess around with the spacers till my car is up and running

well the spacers i have aren't for sale. I just thought you can use mine to try it out and see how they fit before you go buy yours.
I plan on keeping mine in case I need to put my stock wheels back on.

fail.

[Mr_Krispy1183]

^Hahaha, I know how you feel Tracy.

I've been contemplating moving my current 15mms in rear to the front and going 25mm in place of those, but rubbing issues with the fenderWELL as opposed to my rolled fender lip are a sign to me that I should just stay as is. True flushness requires the stiffness of coilovers as well, to keep me from rubbing fenderwell with even slight weight in cargo additions.

Time for Milty and I to beat them up so I can gain some clearance.

[indiglosolara]

^^ I have a fender roller you can use to pull the fenders a little.

[Mr_Krispy1183]

^Thanks Kenny. I don't think a pull is needed, its just that the fenderwells need to be banged up/rounded to give m more clearance. The tires are just perfectly clearing the quarter panel/fender lip.

[Mr_Chunkz]

i need to pull the fenders on my tsx
for the wheels im gonna get for it in the future