A/C idle issue...
While at idle without the A/C on, my lara sits at about 700 RPM with an AFR of 15. Once I turn my A/C on the idle rpm drops to less than 600, gets rough and leans out to afr >18... basically starts to sputter out.
CEL I believe was a p0171 and p0174, lean bank 1 & 2 --> what the wideband uego is reading.
Recently I had a CAI extension added. Before with just an SRI I was not experiencing this. The CAI set up involved adding piping between the throttle body and the existing SRI pipe (relocated the sri). The battery had been unplugged and the ecu is functioning great when the A/C is off. All vacuum lines have been checked, double checked and checked again.
Any ideas as to why the engine is not compensating for the A/C compressor turning on? Could a simple ecu relearn with the A/C on at idle for a few minutes possibly solve this?
Thanks for your time,
Garrett
CEL I believe was a p0171 and p0174, lean bank 1 & 2 --> what the wideband uego is reading.
Recently I had a CAI extension added. Before with just an SRI I was not experiencing this. The CAI set up involved adding piping between the throttle body and the existing SRI pipe (relocated the sri). The battery had been unplugged and the ecu is functioning great when the A/C is off. All vacuum lines have been checked, double checked and checked again.
Any ideas as to why the engine is not compensating for the A/C compressor turning on? Could a simple ecu relearn with the A/C on at idle for a few minutes possibly solve this?
Thanks for your time,
Garrett
-
GzNutz - SolaraGuy Semi-Pro Racer
- Posts: 2354
- Joined: Mon Oct 22, 2007 7:36 pm
- Location: Land of Beer