[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Intake Manifold Removal/Injector Removal.

Skip to content

Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.
Post a reply

Intake Manifold Removal/Injector Removal.

Intake Manifold Removal/Injector Removal.

Postby burnyd » Thu Jun 11, 2009 10:57 am

Hi I have not made many posts on this forum unfortunately :( , but anyways I need some help here... I DD A 99 Solara 1mz powered! I normally go by the BGB For my mr2 / celica issues in the past but unfortantely I was unable to find a write up or any formal information on Pulling a Intake mani off of a 1mz.

I originally had a Miss fire on cyl #1, replaced the plug and wire still have the miss fire... When I pull the Injector out of cy #1 it does nothing still miss fires.... When I pull the injector out of any other Cyl the motor just about Dies... so clearly, cly#1 is bad... I am wondering if anyone has a write up, possibly access to a bgb to taking the upper intake manifold off to get access to that #1 Fuel injector.

thanks.
burnyd
Just Licensed SolaraGuy
 
Posts: 10
Joined: Sat Aug 23, 2008 10:07 am
Top

Postby akora12 » Thu Jun 11, 2009 12:00 pm

I think your asking how to remove the intake plenum, not manifold. The TB has to come off along with the 2 chamber stays in the rear. The installation guide for the TRD supercharger in the link below has the info you need to remove the factory plenum.

http://www.solaraguy.com/viewtopic.php? ... hlight=trd
Last edited by akora12 on Thu Jun 11, 2009 3:04 pm, edited 1 time in total.
Image
2000 Solara SEV6 5-speed S/C - Dismantled and sold :(
akora12
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1410
Joined: Tue Jan 16, 2007 5:12 pm
Location: FW IN
Top

Postby burnyd » Thu Jun 11, 2009 1:19 pm

great thanks that is a big help... only problem is its really hard to read... any chance anyone has the PDF Version?
burnyd
Just Licensed SolaraGuy
 
Posts: 10
Joined: Sat Aug 23, 2008 10:07 am
Top
Post a reply

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 22 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net