Who knows about Auxiliary Lighting?

by **Mr_Chunkz** » Mon Mar 16, 2009 9:24 pm

I am looking to remove my factory fog lights, I will need the additional space for some cooling devices soon....

I'd still like to retain some sort of fog lamp though, so I was looking into something auxiliary that still allows air to pass through ( bolts up where stock fog light is but small enough to allow air to pass around it )...

I wanted to keep my current 50w 9006 HID bulb because its hard to find quality 50w kits nowadays. Does anyone know of any auxiliary fog lamps that utilize a 9006 bulb? Most seem to be h3 bulb.

If not.. is anyone aware of a 9006 to h3 conversion plate?

Also, if all else fails can anyone confirm that no matter what sort of HID bulb I buy ( If I buy an h3 bulb to replace my 9006 bulbs ) that they will plug and play into my current balasts without a hitch?

Thanks in advance.

by **Ilovemylara** » Mon Mar 16, 2009 9:42 pm

how about these.. Im prety sure they use a 50 watt or less bulb, you could just splice into your original wiring. a member on here put a pair like these on the back bumper of their gen2

by **D-money** » Mon Mar 16, 2009 9:51 pm

the lights shown could mount in the grill like mine and give you plenty of room for a ram in the factory spots

by **Ilovemylara** » Mon Mar 16, 2009 10:05 pm

^^thats alotta light output u got there D-money lol

by **Mr_Chunkz** » Mon Mar 16, 2009 11:18 pm

Ilovemylara wrote:how about these.. Im prety sure they use a 50 watt or less bulb, you could just splice into your original wiring. a member on here put a pair like these on the back bumper of their gen2

Does this light use a 9006 bulb?

I admit i WAS looking for something round.. but if this accepts a 9006 i will buy it

If not.. what sort of bulb does it use..

Also.. d money you have a good idea but I was planning to leave the center area free of any obstructions.

At first beause I will mount a custom mesh.. but in a future at some point I will mount a front mount intercooler

Anyway I figure a small enough auxillary lamp would go great where the factory holes were. see Datsrboi's solara

I just wasnt sure if any of these little lights takes a 9006 bulb, which is a pretty large bulb.

by **Ilovemylara** » Mon Mar 16, 2009 11:24 pm

Im not sure if you would be able to find any auxilary style fog lights that use a 9006 bulb... you could just splice into the original harness though.

by **D-money** » Mon Mar 16, 2009 11:26 pm

your plans sound good

by **Dawgz** » Tue Mar 17, 2009 2:08 pm

Mr_Chunkz wrote:I am looking to remove my factory fog lights, I will need the additional space for some cooling devices soon....

I'd still like to retain some sort of fog lamp though, so I was looking into something auxiliary that still allows air to pass through ( bolts up where stock fog light is but small enough to allow air to pass around it )...

I wanted to keep my current 50w 9006 HID bulb because its hard to find quality 50w kits nowadays. Does anyone know of any auxiliary fog lamps that utilize a 9006 bulb? Most seem to be h3 bulb.

If not.. is anyone aware of a 9006 to h3 conversion plate?

Also, if all else fails can anyone confirm that no matter what sort of HID bulb I buy ( If I buy an h3 bulb to replace my 9006 bulbs ) that they will plug and play into my current balasts without a hitch?

Thanks in advance.

U could use the 9006 male harness that they sell on ebay, that will plug into ur existing factory harness and give u a negative and positive wire out...I did that for my h3 bulb conversion for the lexus projectors.

by **Dawgz** » Tue Mar 17, 2009 2:12 pm

Mr_Chunkz wrote:
Ilovemylara wrote:how about these.. Im prety sure they use a 50 watt or less bulb, you could just splice into your original wiring. a member on here put a pair like these on the back bumper of their gen2

Does this light use a 9006 bulb?

I admit i WAS looking for something round.. but if this accepts a 9006 i will buy it

If not.. what sort of bulb does it use..

Also.. d money you have a good idea but I was planning to leave the center area free of any obstructions.

At first beause I will mount a custom mesh.. but in a future at some point I will mount a front mount intercooler

Anyway I figure a small enough auxillary lamp would go great where the factory holes were. see Datsrboi's solara

I just wasnt sure if any of these little lights takes a 9006 bulb, which is a pretty large bulb.

Just buy the lexus es300 fogs, that have a bracket and wat not, and will work real nice, but then agian, u dont like yellow rite? (i forgot =| )

by **Mr_Chunkz** » Tue Mar 17, 2009 9:40 pm

ahaha vik
i wanna stay blue =]

I may buy a set of cheapo h3 hid bulb and put those suckers in to test it in the auxiliary light
only like 25 bucks on egay

Just spent mind blowing money on my car and dont feel like spendin more for now though lol.

Who knows about Auxiliary Lighting?

Who knows about Auxiliary Lighting?

Re: Who knows about Auxiliary Lighting?

Who is online