How to adjust HID pointed down?

[BlKSo|aRa]

after installing my HID the light just go everywhere, and i dont want to blind any1 on the road. so how do i adjust it so that it pointed down at the road. thanks. gen 1.5 by the way

[TLMNICK]

if you look at the back of the headlight housing....you'll see adjustment screws. There are two on each headlight....one to adjust side-to-side and the other one is for up-and-down.

you'll obviously want to adjust the up-and-down one. You're lucky that you have a gen 1.5....those housings are way better for HIDs than the gen1's are. Thats why I did a retrofit....the gen1 headlights are complete garbage if you wanna put HIDs in them.

[Ilovemylara]

theres a screw on the inside of the headlight between the two bulb housings get a #2 phillips screwdriver and turn it, clockwise to go up, and counterclockwise to go down

[BlKSo|aRa]

^^ u mean the 1 look like a cap? between the high beam n low beam?

[ThatVietGuy]

theres a screw on the inside of the headlight between the two bulb housings get a #2 phillips screwdriver and turn it, clockwise to go up, and counterclockwise to go down

Correct, but 8mm socket, not a screwdriver.

[ThatVietGuy]

^^ u mean the 1 look like a cap? between the high beam n low beam?

Yes, it's gray and near the top.