Knock sensor

[cartang]

Blown, Any solution , is there any way to get the GM sensor , any Web to buy them? and the best place to relocate. Thanks for the answers

[ASG14]

http://www.atsracing.net/ats_racing_knock_sensor.htm

[cartang]

Thanks , Its just bolt on ?

[Dawgz]

are u boosted? if not, the ats knock sensor kit shouldnt really be used.


but if u are, use the link asg14 posted up.

[JvR]

Cut the wire from the broken knocksensor from your computer and connect the (second) working knocksensor also on the place you cut the wire (computer side).

So you have 1 working sensor on both computer connectors.

I am drive like that for about 4 months.
If you drive with a turbo/supercharger check if your not driving to lean.

[1gSE]

nice price!! would you boosted guys recommend replacing the stock sensor with this before it blows.....assuming you're throwing some boost at it of course

[akora12]

^^^I'd wait till it goes. Mine have been fine at 6psi. It may not stay that way, but at least I'll know what conditions produced a blown KS.

[cartang]

Yes boosted 6 psi x 7 years. never tu thanks for the answers.

[Akfahad]

^^just rewire your ECU, that's what I had to do and been fine for a little over a year now. Search the forum, there's should be a write up on with some diagram's

[SolaraPete]

Bank 2 just went out on me last week - It really sucks going from boosted to "limp mode"! I'll be ordering the ats kit ASAP, its way cheaper than buying oem at $130 per sensor.....