TPS???

[shocar4]

does anyone know which wire on the throttle positioning sensor is the out going wire! the wire that changes current when the throttle is hammered?

[shocar4]

nobody know?

[no_escape]

Blue, from the ECU wiring pic.

http://www.solaraguy.com/viewtopic.php? ... highlight=

[corlon]

for a 99 sle v6 you should have a yel, blu and brn wires. the brn is ground. the yel is 5 volt ign feed and the blu is the variable wire. hope this helps.

[shocar4]

so then is the yellow the voltage output wire then?

[no_escape]

From how corlon explained it... it seems as if the yellow is the voltage feeding the TPS and the blue is the wire that sends a voltage signal to the ECU that tells the ECU what the Throttle Position is.

Correct me if I'm wrong someone.

[corlon]

sounds like you need the blue wire.

[shocar4]

thanks guys!