I'm looking for someone...

[Jon11582]

I wrote the FAQ on it several years ago after doing it.
http://www.solaraguy.com/viewtopic.php?t=10319

I was watching this thread and I would have offered but you never said where you were from...or how much "top dollar" is.

yes and i used your FAQ on my interior lighting and it worked like a charm
but your replacement guide is for HVAC i was lookin for install pix of auto climate.

Auto is very different from what I know. I believe the bulbs in Auto climate are not user replaceable (soldered on to the circuit board), and the front place doesn't come off for service. Can't confirm this though.

[woa_its_j3ff]

I wrote the FAQ on it several years ago after doing it.
http://www.solaraguy.com/viewtopic.php?t=10319

I was watching this thread and I would have offered but you never said where you were from...or how much "top dollar" is.

yes and i used your FAQ on my interior lighting and it worked like a charm
but your replacement guide is for HVAC i was lookin for install pix of auto climate.

Auto is very different from what I know. I believe the bulbs in Auto climate are not user replaceable (soldered on to the circuit board), and the front place doesn't come off for service. Can't confirm this though.

not true. they are all very tiny little bulbs, a huge pain to get out but it can be done. I have auto climate and have changed my bulbs as well in there. they are NOT soldered in.

[Solorange]

Sharpie Markers

[woa_its_j3ff]

Sharpie Markers

I tried that too but the light output wasnt at the intensity as to what I wanted it to be so I switched to leds.