INSTALLED EBAY SOLARA HEADERS

by **Camry Racing** » Sun Mar 09, 2008 2:57 pm

yes I know about the Y pipe but is good to know that !

by **Jakecallun20** » Sun Mar 09, 2008 6:19 pm

Sorry to TJ, but is that mini-air filter on the valve cover inlet, is that a safe way to give that air? (I assume it is, after all its just taking in air) Just thought i'd ask b/c I think it looks cool. lol.

by **Camry Racing** » Sun Mar 09, 2008 9:19 pm

I just installed that filter so I wouldn't have to drill a hole on my intake

by **Jakecallun20** » Sun Mar 09, 2008 9:39 pm

Camry Racing wrote:I just installed that filter so I wouldn't have to drill a hole on my intake

oh. alright. looks cool, IMO. I may put one on mine. heh.

by **Camry Racing** » Sun Mar 09, 2008 10:50 pm

by **CASTRO** » Sun Mar 09, 2008 11:17 pm

Camry Racing wrote:btw I dont understang why are you talking about 2 resonator since my car only have one(stock one) the other thing was a cat and I have it removed

I'm talking about if you ever do go the greddy route. The greddy catback comes with two tiny resonators. I removed both as one was bad and I liked the sound hence me removing both.

Sorry if it came out confusing.

by **CASTRO** » Sun Mar 09, 2008 11:19 pm

Jakecallun20 wrote:
Camry Racing wrote:I just installed that filter so I wouldn't have to drill a hole on my intake

oh. alright. looks cool, IMO. I may put one on mine. heh.

Looks cool, but remember, it is a vavle cover relief thats designed to vent any gasses. Gasses are oily and was meant to go back into the intake. If you just leave a filter on there, theres no real harm to the motor, but it will vent the oily fumes into your engine bay. That + dust will make the entire bay look like crap. Trust me, been done and seen it countless times on other motors as well. hahaha

by **Camry Racing** » Mon Mar 10, 2008 7:08 am

yeah if you see the valve cover it once expelled some oil and leaved the marks of the oil in the valve covers but for me that is not a big deal :roll:

by **Solorange** » Tue Mar 11, 2008 5:37 pm

Camry Racing wrote:I just installed that filter so I wouldn't have to drill a hole on my intake

Why would you have to drill a hole in your intake in the first place?

by **Camry Racing** » Tue Mar 11, 2008 8:57 pm

cause is like a home made intake lol it doesn't have the holes for anything didn't you noticed that

by **Jakecallun20** » Tue Mar 11, 2008 9:00 pm

Camry Racing wrote:cause is like a home made intake lol it doesn't have the holes for anything didn't you noticed that

Does it have holes for the smaller vacuum hoses? Is it 2.75" diameter? If not you seriously need to remove it.

by **Camry Racing** » Tue Mar 11, 2008 9:40 pm

Like I said before it doesnt have holes for anything and Why do I have to seriously remove it its working perfectly with no problems

by **Jakecallun20** » Wed Mar 12, 2008 9:45 am

Because those vacuum hoses are important, they provide filtered air for the parts that need it. And the whole intake needs to be 2.75" diameter.

by **rewmomi** » Wed Mar 12, 2008 10:02 am

how did u manage to get the back headers off? did u have to take off the cross member or did u slide it through it?

by **Camry Racing** » Wed Mar 12, 2008 7:28 pm

my mecaninc removed passenger side axles and changed a engine support there to very tricky to get the header in there but to remove the stock one was easy for him

INSTALLED EBAY SOLARA HEADERS

Who is online