is300 Rims

[Dawgz]

Would they fit correctly on the gen 1 solara? Or would i need to buy spacers or whatever.

Anyone have any idea?

here's a picture if had for a while, i dono whos solara it is...but it looks real clean with the is300 rims...

[woa_its_j3ff]

yes they will fit. a guy I know who used to be on the forums by the name of Lou rocked them on his car and he has the same suspension setup as us (stechs with tokico blues).
bolt on. no rub, no nothing.
it'll work, long story short.

[Mr_Chunkz]

looks pretty clean....

[ThatVietGuy]

http://www.solaraguy.com/viewtopic.php? ... ight=is300

[DatSRBoi]

I can care less about the rims....


I want that chick!!!

[Ivanhoe]

I can care less about the rims....


I want that chick!!!

I want the rims AND the chick!!!!

[woa_its_j3ff]

that chick ghosts the forums btw

[CASTRO]

i have is300 rims on my camry

[JavaJoe_2]

I'm running a 5mm spacer on the rear. They did rub on my Tokico's, took the paint right off.

[CamryOnBronze]

^ I was going to say, isnt the offset pretty high on those? Im sure theyll fit or be close at least, but you really need to get the offset bro.

[akora12]

The IS rims fit much like the gen. 2 wheels. You'll need a 5mm spacer in the rear.

[CASTRO]

i used to run 5mm spacers in the rear but the 15mm spacers are MUCH better

[akora12]

^^^ I should have said 5mm minimum in the rear. A 5mm spacer gives you less than a fingers width between the tire and strut (assuming your using a 215 or less tire).

[SleeperSolara]

So 10MM spacer would be best if you're usin' 225 width tires??
I love the width of 225's on my DWP.

[akora12]

So 10MM spacer would be best if you're usin' 225 width tires??
I love the width of 225's on my DWP.

I would say a 10mm or 15mm would work for 225's. I'm even thinking of upgrading to a 10mm spacer just to get the outside of the tire more flush with the wheel well.

BTW, sorry man for not getting you those pics. I took them and totally forgot to e-mail them to you. I'll make a note to send them this evening.