[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - dogbone install

Skip to content

Talk about aftermarket Toyota Solara Gen 1-1.5 upgrades.
Post a reply

dogbone install

dogbone install

Postby rob96826 » Thu Dec 20, 2007 2:02 am

after replacing the oe bushings on the dog bone with superpro bushing, im getting vibrations through the steering wheel & a bit of cabin noise which was not there previously to the upgrade. also was the washer required to be installed??? i left it out since i could not get it to line up
rob96826
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 55
Joined: Tue Sep 05, 2006 12:44 am
Top

Re: dogbone install

Postby SleeperSolara » Thu Dec 20, 2007 7:02 am

rob96826 wrote:after replacing the oe bushings on the dog bone with superpro bushing, im getting vibrations through the steering wheel & a bit of cabin noise which was not there previously to the upgrade. also was the washer required to be installed??? i left it out since i could not get it to line up


Vibrations through the steerin' wheel??
Do you mean vibrations at idle??
There is suppose to be some vibrations through the cabin and steerin' wheel at idle if that's what you're talkin' about.
You don't have to use the washer.
I didn't use mine, i think that's washer is for if you have an S/C.
2000 Solara SE auto V6. Diamond White Pearl.
Top Speed Run finished at 130 mph. :o
Too many modifcations for the signature.
User avatar
SleeperSolara
SolaraGuy Hall of Famer
SolaraGuy Hall of Famer
 
Posts: 9257
Joined: Tue Jun 15, 2004 11:38 am
Location: The 405
Top

Postby Mole » Thu Dec 20, 2007 10:27 am

i never upgraded mounts, but if the mounts are upgraded aftermarket, things should be stiffer hence more feeling of the motor in the car.
the power of 8
User avatar
Mole
molerator
molerator
 
Posts: 1677884
Joined: Sun Apr 20, 2003 12:25 pm
Location: Glendale, Ca
Top

Postby Paladin06Greg » Thu Dec 20, 2007 11:52 am

I was one of the first and have never had any problems.
Paladin06Greg
Torqued Solara
Torqued Solara
 
Posts: 3056
Joined: Tue Mar 09, 2004 2:19 pm
Location: East Valley AZ, USA
Top

Postby SleeperSolara » Thu Dec 20, 2007 5:31 pm

I haven't had any problems either.
I've love the Super Pro dogbone bushin'.
I also have FCA bushin's and P/S bushin's too. :D
2000 Solara SE auto V6. Diamond White Pearl.
Top Speed Run finished at 130 mph. :o
Too many modifcations for the signature.
User avatar
SleeperSolara
SolaraGuy Hall of Famer
SolaraGuy Hall of Famer
 
Posts: 9257
Joined: Tue Jun 15, 2004 11:38 am
Location: The 405
Top

Postby Paladin06Greg » Thu Dec 20, 2007 5:59 pm

DITTO - and the rear mount bushing. Only one of these produced..

SleeperSolara wrote:I haven't had any problems either.
I've love the Super Pro dogbone bushin'.
I also have FCA bushin's and P/S bushin's too. :D
Paladin06Greg
Torqued Solara
Torqued Solara
 
Posts: 3056
Joined: Tue Mar 09, 2004 2:19 pm
Location: East Valley AZ, USA
Top

Postby SleeperSolara » Fri Dec 21, 2007 7:01 pm

Paladin06Greg wrote:DITTO - and the rear mount bushing. Only one of these produced..

SleeperSolara wrote:I haven't had any problems either.
I've love the Super Pro dogbone bushin'.
I also have FCA bushin's and P/S bushin's too. :D


Which i envy you.
You're so lucky.
I really happy i was able to buy as many SuperPro poly bushin' i could get.
Now installin' the FCA and P/S bushin' is a different story. lol.
2000 Solara SE auto V6. Diamond White Pearl.
Top Speed Run finished at 130 mph. :o
Too many modifcations for the signature.
User avatar
SleeperSolara
SolaraGuy Hall of Famer
SolaraGuy Hall of Famer
 
Posts: 9257
Joined: Tue Jun 15, 2004 11:38 am
Location: The 405
Top

Postby TMMK Toy » Sat Dec 22, 2007 9:25 am

Ya, vibration is normal with stiffer mount mount bushings. Consider it a small tradeoff. Try driving a car with all solid mounts. Now that feels like Jenna Jameson's vibrator.
TMMK Toy
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 768
Joined: Sat Sep 02, 2006 4:42 pm
Top

Postby SleeperSolara » Sat Dec 22, 2007 11:04 pm

TMMK Toy wrote:Ya, vibration is normal with stiffer mount mount bushings. Consider it a small tradeoff. Try driving a car with all solid mounts. Now that feels like Jenna Jameson's vibrator.


:lol:
Or havin' your back crunch everytime you hit a dip from poly RCA bushin's. lol.
2000 Solara SE auto V6. Diamond White Pearl.
Top Speed Run finished at 130 mph. :o
Too many modifcations for the signature.
User avatar
SleeperSolara
SolaraGuy Hall of Famer
SolaraGuy Hall of Famer
 
Posts: 9257
Joined: Tue Jun 15, 2004 11:38 am
Location: The 405
Top
Post a reply

Return to Aftermarket Gen1 and 1.5

Who is online

Users browsing this forum: No registered users and 7 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net