[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - CEL on my 04 SLE

Skip to content

Stock talk about the Generation 2 and 2.5 Toyota Solara which was released in 2004-2007
Post a reply

CEL on my 04 SLE

CEL on my 04 SLE

Postby solarass » Sun Feb 25, 2007 8:12 pm

my CEL blinks 6 times when i start my car up, i have never noticed it, however does anyone know what this means? its a v6 with 21K miles, have not had my 20K maintenance done on it, because i went to discount tire and got a rotate and balance for free and changed the oil myself bringing my 20K maintenance to a whopping 25-35 bucks. i am considering changing my fuel filter since those need to be done about every 15K...thanks guys!
solarass
Just Licensed SolaraGuy
 
Posts: 27
Joined: Mon Dec 04, 2006 11:06 am
Top

Postby Ruski » Mon Feb 26, 2007 6:35 am

Post in the Correct Section ..
Mods Please move
Totaled 9-14-07 NEW 6-6-08 04 Se Sport White
Image
User avatar
Ruski
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 2238
Joined: Mon Oct 02, 2006 5:38 am
Location: MurderLand
Top

Postby Down2TheC » Mon Feb 26, 2007 9:58 am

I think it means there's a code in the ECU that is no longer active. I goofed up when I put my intake back to stock once and it would put on the CEL when I gunned it. Then it would go off but would flash at start up. I fixed the install but had to clear my ECU to get rid of the flashing.

1. Check the owners manual. It'll tell you what the blinking means for sure.
2. If it's a code, most local parts stores will plug in and read it for free.
3. depending what it is, they can clear it or you can take off the batt cable for >30 min to clear it.
http://solara.down2thec.com/gallery/
"We need failures in this world... failures gives us lap dances and chicken nuggets and I like both."
User avatar
Down2TheC
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 3711
Joined: Sat Dec 25, 2004 12:03 am
Location: Chicago area
Top
Post a reply

Return to Stock Gen 2 and 2.5

Who is online

Users browsing this forum: No registered users and 6 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Cerulean Style by Daniel St. Jules of Gamexe.net