WTB: catless stock exhaust manifolds

by **DaveMush** » Fri May 05, 2006 3:24 pm

I'm converting an automatic engine to run as a manual in my mr2...

I need a set of stock manifolds without the pre-cats...

Any sellers? Email me at DaveMush2@twcny.rr.com

-Dave

by **sahuddleston** » Fri May 05, 2006 3:26 pm

solara manifold or mr2 manifold?

by **Nyyankees3511** » Sat May 06, 2006 8:56 am

Its for his mr2 im guessing but he has a 1mzfe in the mr2.

by **DaveMush** » Sat May 06, 2006 3:02 pm

Nyyankees3511 wrote:Its for his mr2 im guessing but he has a 1mzfe in the mr2.

yes i do... hence the pics and dyno...

I need catless manifolds for a 2001 1MZ from a Solara SLE

by **DaveMush** » Thu May 11, 2006 8:28 pm

bump...

by **PhreakdOut** » Thu May 11, 2006 8:39 pm

DaveMush wrote:
Nyyankees3511 wrote:Its for his mr2 im guessing but he has a 1mzfe in the mr2.

yes i do... hence the pics and dyno...

I need catless manifolds for a 2001 1MZ from a Solara SLE

Would you have a pic taken off the internet for what you're looking for? (Or perhaps a Toyota part number.) I have a bunch of stock manifolds at work (without cats) but I'm not sure what Toyota or engine they came from.

by **DaveMush** » Sun May 21, 2006 6:24 pm

I dont have pics of the kind of manifolds I'm looking for, only pics of what I have now and what I dont need...

The manifolds I'm looking for are shorter and dont have the bulbous things (pre-cats) attached after the collector.

The first two pics show the front header having the pre-cat... Not the part I want. I need the front header to be more like the 3rd pic (rear header) w/o the pre-cats... Short and stubby.

by **PhreakdOut** » Sun May 21, 2006 6:38 pm

I believe 97-99 Camry V-6 might be what you're looking for. I'll have to do some research. We used to make the factory manifolds years ago. What a pain to make! The ones we made did not have the precat attached.

by **DaveMush** » Mon May 22, 2006 9:36 am

I know they were available on the 2001 Solara as the last engine I had was equipped w/ those manifolds.

by **PhreakdOut** » Mon May 22, 2006 9:52 am

DaveMush wrote:I know they were available on the 2001 Solara as the last engine I had was equipped w/ those manifolds.

That would be our old parts. I'll look around to see if we have any 3037 and 3038 manifolds left. Service parts are now made in Japan, so it may be doubtful.

by **CASTRO** » Mon May 22, 2006 10:00 am

ive got those manifolds... 97 1MZ Camry... try looking in the junk yards for em. The solaras usually have the pre-cats

Website · by **Turbosolara** » Mon May 22, 2006 10:13 am

i think all california version has cat and federal version doesnt

by **DaveMush** » Wed May 24, 2006 9:18 pm

by **PhreakdOut** » Wed May 24, 2006 9:37 pm

The 17150-20010 is a part number for Japanese production of this part. You can also try part number 17150-0A010 at the dealer. This gets you the left hand manifold with no converter.

The right side is 17140-0A010. (Same as 17140-20010) I've confirmed the part numbers are equivelent.

Applications for the manifolds:
95-99 Avalon
97-01 Camry
98-01 Solara all. The left manifold carried over to the '02 man trans only.

I haven't been back to the engineering pole barn recently to see if we have any. We had over 500 sets a few years ago but disposed of them all when service requirements were transferred to our partner in Japan.

Had I known then ...

by **DaveMush** » Wed May 31, 2006 7:11 am

WTB: catless stock exhaust manifolds

WTB: catless stock exhaust manifolds

Who is online