[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Help!!!
Stock talk about the Generation 1 and 1.5 Toyota Solara which were produced from 1999 to 2003.

Help!!!

Help!!!

Postby mattacosta » Sun Jan 26, 2003 8:49 pm

Ok Heres My Project I want to do!!!
I want to Run Dual Exhausts, I should be able to slip the stock ehaust into a Y pipe and than run the dual exhausts correct? Anybody who has done this please help.. I am going to have 2 Stock Exhausts, not 2 aftermarket..

Pics or a Diagram would help ALOT thanks!!
1999 Toyota Solara V6 SE
All Stock... For Now
http://www.cardomain.com/id/99solarama
mattacosta
Regular SolaraGuy Member
Regular SolaraGuy Member
 
Posts: 65
Joined: Fri Dec 27, 2002 11:31 pm
Location: NJ

Re: Help!!!

Postby Yanks0114 » Sun Jan 26, 2003 8:54 pm

mattacosta wrote:Ok Heres My Project I want to do!!!
I want to Run Dual Exhausts, I should be able to slip the stock ehaust into a Y pipe and than run the dual exhausts correct? Anybody who has done this please help.. I am going to have 2 Stock Exhausts, not 2 aftermarket..

Pics or a Diagram would help ALOT thanks!!


Well you best of luck, its going to be a long and expensive project. I tried to do it a while back and i gave up after i got many quotes of over $1000. You will see no performance gains. Since there is not enough room underneath the driver's side of the car, you will either have the pipe hanging low or you'll have to use oval pipe. Either way you won't be able to lower your car. Also in order to get it to sit symetrically you'll need to move your stock muffler. Mr. B. From teamsc3.com has this setup and it looks great, but when he tried to put his body kit on he ran into big problems. The tips were venting hot exhaust right into the body kit. I would not reccomend dual exhaust unless you are up for it. Use to search function to read up about it.
Yanks0114
SolaraGuy Moderator
SolaraGuy Moderator
 
Posts: 4756
Joined: Sat Aug 24, 2002 12:01 am

Return to Stock Gen 1 and 1.5

Who is online

Users browsing this forum: No registered users and 5 guests