Automatic Shift Knob

[SPF 0]

After looking at the seller's feedback, I have a sudden urge to take shower (Ack! Can't get clean!).

All kidding aside, I'd keep on looking rather than buy from someone with 6.5% negative feedback.

[krook]

napolex.com

carbon fiber A/T WITH overdrive button. plug and play.
simply splice the wires from the old O/D button to the new one.

[ClassySolaraGuy]

Nice find! Should look nice in my Solara.

[krook]

this is the one i'm gonna git. the big issue about this shifter, however, is that it sits too high up. there was a post on TN (Toyotanation.com) of a member who actually was able to cut the pipe to let the shifter sit lower, which is what i'm gonna do as well.

[Hsakuragi]

for the ebay..it's not Razo...don't buy it..

i remember APC or soemthign has it also, i meant it's EXACTLY the same style and look...

krook - that was the issuse i WAS having also...

imotorgear.com has few razo for shift knob that has OD

[Hsakuragi]

RA91


RA92


[/url]

[LatinDragonXJC]

this is the one i'm gonna git. the big issue about this shifter, however, is that it sits too high up. there was a post on TN (Toyotanation.com) of a member who actually was able to cut the pipe to let the shifter sit lower, which is what i'm gonna do as well.

Now thats a nice knob....

For those who have changed the knob, did you find it hard to do?

[Hsakuragi]

as long as u know how to take wood trim out...splice the wire...probably can be done within 1 hour

[ChargedSolara]

its easy. i used a universal shift boot and tucked it in the sides for a nice fit. i will take some pics tommorow

[krook]

this is the one i'm gonna git. the big issue about this shifter, however, is that it sits too high up. there was a post on TN (Toyotanation.com) of a member who actually was able to cut the pipe to let the shifter sit lower, which is what i'm gonna do as well.

Now thats a nice knob....

For those who have changed the knob, did you find it hard to do?

it should be easy. removal is a snap with just 2 screws holding the knob to the shift rod, and retainter clips holding in the shift surround plastic plate.

if you're gonna cut the shift rod though, it might take a while. i might suggest a dremel.

[LatinDragonXJC]

thanks guys tomorrow is my day off, Ima give it a try, before I actually buy one.

Has anyone bought this Ebay one?....Im afraid it'll be the cheap plastic type.

[~Spadwaller~]

You should do a tutorial

[Dimik]

^^ AGREED

I don't know Razo doesn't look that comfortable, is anybody using it, how is it? o_O maybe it's just me..

[Hsakuragi]

feels like u are driving a jet, that's all i can say

[ChargedSolara]

razo is cool, mine has a OD button on the top, you push the knob down to shift. just gets hot during summer, but its comfy.