[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - Sound Dampening/Dynamat
Talk about aftermarket Toyota Solara Gen 2 and 2.5 upgrades.

Sound Dampening/Dynamat

Sound Dampening/Dynamat

Postby dvdchris45 » Fri Apr 08, 2005 10:44 am

Anyone know where I can find some good quality but not-so-expensive Dynamat? So far I found one for $90 but thats 200 sq ft. I dont need that much! Any suggestions?
<b>04 Desert Sand V6</b>
<i>Injen + Magnaflow </i>
<i>TRD FSTB + RSB</i>
<i>HID + A/V + iPod</i>
User avatar
dvdchris45
SolaraGuy Street Racer
SolaraGuy Street Racer
 
Posts: 1690
Joined: Mon Jul 12, 2004 4:49 pm
Location: Valley Glen, CA

Postby theprodigy79 » Tue May 17, 2005 9:01 am

I personally recommend Dynamat Xtreme Door Kits. Each box contains four 12" x 36" sheets. I've seen them on-line for as low as $50... around $70 from reputable sources that I am familiar with. 3 boxes covered my doors and trunk, perfect amount of material to do what I needed. Xtreme is the highest grade of Dynamat; you can find the lower grades for even less, however I'd say it's a great investment.
'04 Solara SE Sport V6, all TRD + CP-e, gone but not forgotten... '09 G37S Sedan and '88 Supra Turbo project
Image
User avatar
theprodigy79
SolaraGuy Semi-Pro Racer
SolaraGuy Semi-Pro Racer
 
Posts: 3460
Joined: Tue May 17, 2005 8:12 am
Location: Northern Virginia (703)

Postby cam2Xrunner » Wed May 18, 2005 2:37 am

Dynamat Extreme is VERY expesive and there is the same if not better stuff out there for much less.

By those numbers
12 Sq ft of Dynamat Extreme is 50 bucks

For 65 dollars you can get roughly 50 Sq ft of Edead V1.se which is 70 mils thick.

http://www.edesignaudio.com/forum_discount.php

62.5 Sq ft of Raammat60 sells for 89 plus shipping(ask for the forum discount). Raammat is Butyl Based and not asphalt like reg dynamat and others. Sticks very good and is very easy to work with. I've had lot's of good experience with this product.

www.raamaudio.com

There's also a new product out from www.secondskinaudio.com Called Hazmat that is 65 mils thick with a 2 mil mylar Film. This is Butyl Rubber as opposed to Asphalt based as well. The advantage to this product is that it wieghs less than reg aluminized backed matting. To some that is very important for reducing overall weight.

http://www.secondskinaudio.com/products ... roductid=4
Pricing and more info there.
Image
cam2Xrunner
SolaraGuy Driver
SolaraGuy Driver
 
Posts: 540
Joined: Thu Jun 26, 2003 10:26 pm
Location: so cal

Return to Aftermarket Gen 2 and 2.5

Who is online

Users browsing this forum: No registered users and 16 guests