Advise to help save your transmission
I'm just passing along some info that has been given to me by many car enthusiasts, mechanics, etc.
The following is a way to keep pressure (the weight of your car) from being put on the transmission/gears while your car is parked.
-for autos - When you come to a stop to park, put the car in neutral, set the parking brake, and remove your foot from the brake to make sure the car will not roll. Then put your foot back on the brake and put the car in park. This process allows the parking brake bear the weight of the car, rather than the weight of the car resting against the transmission/gears.
-for manuals - stop, put the car in neutral, set the parking brake, make sure the car does not move, turn off the car, then put it back in gear (if you want).
Changing gears... autos only...
Whenever changing from park to reverse or to drive or from reverse to drive (and back), make sure your car is at a complete stop, change gears, and wait for a second or two until you feel, hear, or see (on your tach) that the gear you selected is engaged, then begin to drive... over time it will help save your transmission Too many people often start to move or are not completely stopped when changing gears. I know from the bad experiences of others... some of whom went through three transmission by 100k miles. I have always done the above, and I have never had a problem with a transmission on any car that I have owned.
Just trying to help!
The following is a way to keep pressure (the weight of your car) from being put on the transmission/gears while your car is parked.
-for autos - When you come to a stop to park, put the car in neutral, set the parking brake, and remove your foot from the brake to make sure the car will not roll. Then put your foot back on the brake and put the car in park. This process allows the parking brake bear the weight of the car, rather than the weight of the car resting against the transmission/gears.
-for manuals - stop, put the car in neutral, set the parking brake, make sure the car does not move, turn off the car, then put it back in gear (if you want).
Changing gears... autos only...
Whenever changing from park to reverse or to drive or from reverse to drive (and back), make sure your car is at a complete stop, change gears, and wait for a second or two until you feel, hear, or see (on your tach) that the gear you selected is engaged, then begin to drive... over time it will help save your transmission Too many people often start to move or are not completely stopped when changing gears. I know from the bad experiences of others... some of whom went through three transmission by 100k miles. I have always done the above, and I have never had a problem with a transmission on any car that I have owned.
Just trying to help!

2004 OP/sle
- L.A.solaraman
- Just Licensed SolaraGuy
- Posts: 23
- Joined: Tue Mar 15, 2005 5:49 pm