Gen 1.5 Front Valence on a Gen 1
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20044%20(2).jpg)
Just a quick look of how it will be when done
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20046%20(2).jpg)
Since none of the mounting points match up on the gen1 and 1.5 i had to add a screw in so that i could mount up the gen 1.5 valence.
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20048%20(2).jpg)
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20060%20(2).jpg)
The 2 screws that i put in the front
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20069%20(2).jpg)
I zip tied the center mount on the kit to the tow hook for added support.
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20057%20(2).jpg)
Adjusting the zip ties
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20061%20(2).jpg)
Heres a pic of the bolt that i added next to the stock bolt.
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20063%20(2).jpg)
Coner angle shot of finished product.
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20064%20(2).jpg)
Top view
![Image](http://i.xanga.com/mUmBoGuMbO/Nov.%204%202004%20067%20(2).jpg)
Font View
![Image](http://xfe.xanga.com/ca184553d113312717943/b9198077.jpg)
- TRD MCV20L
- SolaraGuy Driver
- Posts: 427
- Joined: Thu Sep 25, 2003 6:07 pm
- Location: Oahu, Hawaii Da Aloha State