[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected 'Europe/Moscow' for 'MSD/4.0/DST' instead
SolaraGuy.com • View topic - dyno #'s after rebuild 290.7 hp, 273.3 lbft

SolaraGuy.com

Drive faster, live longer.
http://www.solaraguy.com/

dyno #'s after rebuild 290.7 hp, 273.3 lbft

http://www.solaraguy.com/viewtopic.php?f=23&t=47131

Page 2 of 2

PostPosted: Wed Oct 21, 2009 7:35 am
by Akfahad
borat... *nice*

PostPosted: Wed Oct 21, 2009 3:44 pm
by bbq bob
ron , i'm only running 5.5 lbs. of boost. i get 7 lbs of boost at wot only. the tranny should hold up. i run mine at the track. 272 hp with an auto. still working good.

PostPosted: Wed Oct 21, 2009 4:12 pm
by crispone
Those are really pretty clean curves!


Does it "stumble" just a bit at 3k or so... or is that the converter transitioning?




-crisp :evilbat:

PostPosted: Wed Oct 21, 2009 4:16 pm
by Dawgz
ur on a stock trans? if so, impressive it can hold all that power.


Hows the shifting from first to second, or second to third?

PostPosted: Wed Oct 21, 2009 4:20 pm
by PhreakdOut
Looks like you have two threads going. I'll lock this one.

Continue here:

http://www.solaraguy.com/viewtopic.php?t=47137
All times are UTC - 8 hours [ DST ]
Page 2 of 2
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/