1MZ-FE TB parts

[angmedic911]

Does anyone know where I can get the sensors for the 1MZ-FE throttle body aside from the dealer. I have a 98 Lexus ES300 with auto transmission and had Proflow Design rebore a TB, but Jim at Proflow Design stated one sensor is missing on the TB. I know I can remove the two sensors on my current TB and install them on the rebored, but I figured I would buy the two new sensors and install them on the rebored TB. I believe one sensor is the idle control sensor at the bottom of the TB and the other is a vaccuum type diaphram sensor on the side of the TB that has a small hose that runs to the top of the TB. Also will I need to get a new gasket in order to bolt on the rebored TB onto the intake manifold and will I need new gaskets for the sensors? Any help would be greatly appreciated. Thanks.

[WUTANGCLAN]

have you tried junkyard?

[trd4life]

I have all the sensors you need at $30 shipped.


I'll snap pics tomorrow for you.


thanks

gabe

[Mr_Krispy1183]

^There you go Rob, Gabe is legit as they come!

[angmedic911]

I have all the sensors you need at $30 shipped.


I'll snap pics tomorrow for you.


thanks

gabe

Thanks alot Gabe. I need the bottom sensor and then the three metal hoses that bolt onto the bottom of the TB and then I need the side sensor, the TB came with the vaccuum diaphram and small black hose, but is missing the side sensor. Another question, what is considered the core for a TB? Jim at Proflow asked that I return a core TB back to him. I have an extra TB, without the throttle bracket holder, neither sensors and is missing the bottom piece that has the three metal hoses. He sent me a rebored TB with the bottom sensor and metal hoses and the vaccuum diaphram and hose. I am wonder if its ok to send back a bone stock TB with no sensors? Thanks.

[trd4life]

i think a bare bone TB would be acceptable as a core.

[angmedic911]

i think a bare bone TB would be acceptable as a core.

Thanks Gabe. BTW, did you take pics of the sensors/parts? Really interested in them if there the right ones I need. Thanks bro.

[trd4life]

Hey man. just let me know which sensors you need k.

thanks

Gabe
GP Customs

[angmedic911]

How much for the these two parts?

[trd4life]

30 shipped

paypal is

gabe_potter@hotmail.com

thanks

gabe