TRD SC F/S
by ASG14 » Mon Jun 02, 2008 10:40 pm
Ok, here it is.
It's a TRD SC unit. Not sure of mileage. It has been PORTED. It was painted by the previous owner, and I've been stripping it off, but I have not finished it. It needs a new powdercoat. Thats the only downside to all this.
I have 2 SC's. This one I got 1st, and had on my car for 2 weeks, and ran it at the Dyno. Stock Intake and Exhaust, and put down about 190WHP. I took it off to strip it and have it re-powdercoated, and put my other one on. I was going to keep it for another project I have been planning, but with gas prices, thats taken a lot of my money as I do a LOT of driving. So if I actually get my ass in gear and get a job, I'll actually do the 2nd project car and get another SC in the future, and prolly end up paying more at this rate.
Included:
1 Ported TRD SC (Actuator, pulley, pulley nut, rubber elbo)
1 Type 1 idler plate, with all pulley's (pulley's are good, I replaced 1 that was bad with a good used one I had)
1 Auto Trans EGR Tube
1 Manual Trans EBC (I don't know why 1 is Auto and 1 Manual, don;t ask, I have no clue)
1 NEW alternator bolt from DAWGZ group buy
1 Alternator spacer
1 Rear bracket spacer (Not TRD, I had to buy this elsewhere)
1 Spare pulley bolt/nut
2 new throttle body studs from the dealer
2 EGR studs
2 Idler Assembly to engine bolts
1 Grounding wire
1 Boost Line NEW, never opened
1 Fuel line for the PCV. The way it is stock with the setup, the tube gets crunched. This is harder and longer, so you just route it differently so nothing is crunched.
4 Vacuume tubes. There were 3 the TRD manual said came witht he kit, so I bought the right sizes and cut them to length. I will include more that I got if requested by buyer.
1 Set of 3 TRD manuals for this SC I printed out.
I do not have the bolt that goes through the upper pulley/dogbone mount, but it WILL be included. I just need to go pick one up.
Only thing missing is the Belt. I never got one when I bought this.
PLEASE feel free to ask questions.
If people feel the need, my Ebay ID is 14ASG. If someone local buys it, I'll knock off some money for the shipping if you pick it up, and I'll offer my help on installing it, as I can do it pretty fast at this point.
I'm asking $2850 SHIPPED/INSURED within the continental 48 states. I'll take PayPal (you pay the fee's) or a Money Order. I will ship elsewhere at buyers expense. I have done a mass amount of shipping to other countries, so it;s not an issue for me. And this will be packed well. I'm pretty firm on this price.
~Adam
It's a TRD SC unit. Not sure of mileage. It has been PORTED. It was painted by the previous owner, and I've been stripping it off, but I have not finished it. It needs a new powdercoat. Thats the only downside to all this.
I have 2 SC's. This one I got 1st, and had on my car for 2 weeks, and ran it at the Dyno. Stock Intake and Exhaust, and put down about 190WHP. I took it off to strip it and have it re-powdercoated, and put my other one on. I was going to keep it for another project I have been planning, but with gas prices, thats taken a lot of my money as I do a LOT of driving. So if I actually get my ass in gear and get a job, I'll actually do the 2nd project car and get another SC in the future, and prolly end up paying more at this rate.
Included:
1 Ported TRD SC (Actuator, pulley, pulley nut, rubber elbo)
1 Type 1 idler plate, with all pulley's (pulley's are good, I replaced 1 that was bad with a good used one I had)
1 Auto Trans EGR Tube
1 Manual Trans EBC (I don't know why 1 is Auto and 1 Manual, don;t ask, I have no clue)
1 NEW alternator bolt from DAWGZ group buy
1 Alternator spacer
1 Rear bracket spacer (Not TRD, I had to buy this elsewhere)
1 Spare pulley bolt/nut
2 new throttle body studs from the dealer
2 EGR studs
2 Idler Assembly to engine bolts
1 Grounding wire
1 Boost Line NEW, never opened
1 Fuel line for the PCV. The way it is stock with the setup, the tube gets crunched. This is harder and longer, so you just route it differently so nothing is crunched.
4 Vacuume tubes. There were 3 the TRD manual said came witht he kit, so I bought the right sizes and cut them to length. I will include more that I got if requested by buyer.
1 Set of 3 TRD manuals for this SC I printed out.
I do not have the bolt that goes through the upper pulley/dogbone mount, but it WILL be included. I just need to go pick one up.
Only thing missing is the Belt. I never got one when I bought this.
PLEASE feel free to ask questions.
If people feel the need, my Ebay ID is 14ASG. If someone local buys it, I'll knock off some money for the shipping if you pick it up, and I'll offer my help on installing it, as I can do it pretty fast at this point.
I'm asking $2850 SHIPPED/INSURED within the continental 48 states. I'll take PayPal (you pay the fee's) or a Money Order. I will ship elsewhere at buyers expense. I have done a mass amount of shipping to other countries, so it;s not an issue for me. And this will be packed well. I'm pretty firm on this price.
~Adam
- ASG14
- SolaraGuy Street Racer
- Posts: 1632
- Joined: Mon Apr 10, 2006 3:02 pm
- Location: Stamford Connecticut
