Programing Keyless Entry Remote ('02+)
Here are the instructions to programming your keyless entry remote by yourself for free. NOTE: You can only have up to 4 keyless entry remotes programmed with your car at once.
1. Driver's door open, key removed from ignition switch.
2. Within 5 seconds:
...A) Insert and remove the key from ignition switch twice.
3. Within 40 seconds:
...A) Close and open driver's door twice.
...B) Insert and remove the key from the ignition switch.
...C) Close and open driver's door twice.
...D) Insert the key into ignition switch and close the driver's door.
4. Within 40 seconds:
...A) Switch ignition ON and OFF once to program a new remote.
...B) Remove key from ignition switch:
.........1) Car should lock and unlock once.
5. Within 40 seconds:
...A) Press and hold LOCK and UNLOCK buttons on remote for 2 seconds.
6. Within 3 seconds:
...A) Press LOCK on the remote.
...B) Car should lock and unlock once. Twice means you messed up.
7. Within 40 seconds:
...A) Repeat button procedure to program remaining new transmitters.
1. Driver's door open, key removed from ignition switch.
2. Within 5 seconds:
...A) Insert and remove the key from ignition switch twice.
3. Within 40 seconds:
...A) Close and open driver's door twice.
...B) Insert and remove the key from the ignition switch.
...C) Close and open driver's door twice.
...D) Insert the key into ignition switch and close the driver's door.
4. Within 40 seconds:
...A) Switch ignition ON and OFF once to program a new remote.
...B) Remove key from ignition switch:
.........1) Car should lock and unlock once.
5. Within 40 seconds:
...A) Press and hold LOCK and UNLOCK buttons on remote for 2 seconds.
6. Within 3 seconds:
...A) Press LOCK on the remote.
...B) Car should lock and unlock once. Twice means you messed up.
7. Within 40 seconds:
...A) Repeat button procedure to program remaining new transmitters.
-
RDKamikaze - SolaraGuy Driver
- Posts: 933
- Joined: Wed May 31, 2006 5:59 pm
- Location: Mesa, AZ