LED LICENSE PLATE BULBS & LED REVERSE BULBS

by **AguinaldoHomes Inc** » Wed Dec 05, 2007 9:43 pm

Can you guys recommend a good brand for led reverse and license plate bulbs for an 03 Solara SLE V6? Also, what type should I get?

Thanks,

Mark

by **woa_its_j3ff** » Wed Dec 05, 2007 9:45 pm

912 bulbs are good reverse lights.
194 bulbs are good license plate lights.
get pure white ones.
superbrightleds.com is the way to go.
for the 912 bulbs go with the 6-WLED one.
194 bulbs for the license place bulb dont matter much.
hope u find what ur lookin for.

by **AguinaldoHomes Inc** » Wed Dec 05, 2007 9:47 pm

Do these bulbs fit perfectly or do I have to do some sort of modifications to make 'em work?

Thanks,

by **woa_its_j3ff** » Wed Dec 05, 2007 9:49 pm

its plug n play. to do modification ud have to be an idiot lol.
you'll be just fine.

by **Akfahad** » Wed Dec 05, 2007 9:50 pm

i always use autolumination.com for all the light bulbs/LEDs i need

by **AguinaldoHomes Inc** » Wed Dec 05, 2007 9:56 pm

can i use this type for my reverse: 921-x12 LED Wedge Base Bulbs
and for my license plate: WLED-x5 LED Wedge Base Bulbs

by **sahuddleston** » Wed Dec 05, 2007 9:56 pm

piaa hyperwhite 194 wedge bulbs. got mine at eautoworks.com

by **woa_its_j3ff** » Wed Dec 05, 2007 9:57 pm

AguinaldoHomes Inc wrote:can i use this type for my reverse: 921-x12 LED Wedge Base Bulbs
and for my license plate: WLED-x5 LED Wedge Base Bulbs

u cant fit a 921 bulb in the license plate light, it's too big.
only 914.

but for the 921, as long as it has the 921 number on there, it can fit. u can use the 914 bulb too for the reverse light (921), but the bulb size (NOT plug)is way too small. not even worth it.

by **Mr_Chunkz** » Wed Dec 05, 2007 11:29 pm

Autoluminations bulbs are the best ive ever seen and ive been thru countless LED bulb setups
Highly recommend them

by **DrLove** » Thu Dec 06, 2007 8:33 am

for the license plate light first I had 194 white LED.. it was cool ! But Ive used them to make my white gauges.

then Ive used "hyperwhite" bulb, it's more white than regular bulb but it's not day and night..the difference is there but nobody except me can tell.

by **Mr_Chunkz** » Thu Dec 06, 2007 6:50 pm

Just remember when using LED for either application ( back up/license place) youre going to want to use a bulb that has a multiple angle output. For my license plate light right now i have 10 LED per bulb. 4 rows of 2 on the sides and 2 at the tip to aim straight on. Each of my reverse lights has 15 LED per bulb. same idea. There are 4 rows of 3 and 3 at the tip. It makes for more even light distribution and a better overall look.

by **DrLove** » Fri Dec 07, 2007 9:30 am

Mine was

cheap one with like 3 leds 3mm on each..it s directional but when u put it in the licence plate cas..the light is going everywhere on the plate..I was surprise how great it was.. but it was like $12 for 2..so I used them on my gauges and reuse the poor quality "hyperwhite" bulb for the licence plate.

by **SolaraGuy22** » Sat Dec 08, 2007 9:50 pm

I bought some LED ones and they weren't as bright because they were facing out instead sideways to reflect. I just went with the hyperwhite bulbs you can pick up pretty much anywhere. Here's a pic from my CarDomain page.

by **kpxboi0619** » Sat Dec 08, 2007 9:53 pm

by **AguinaldoHomes Inc** » Sun Dec 09, 2007 8:40 am

Can any of you guys post more pics of your led upgrade on your reverse or license plate bulbs?

LED LICENSE PLATE BULBS & LED REVERSE BULBS

LED LICENSE PLATE BULBS & LED REVERSE BULBS

Who is online